OSD Operation
OSD Overview
The On Screen Display (OSD) is used to handle all computer control and switching procedures. All procedures start from the OSD Main Menu. To pop up the Main Menu, tap the [Scroll Lock] key twice. Note: You can optionally change the Hotkey to the Ctrl key (see OSD Hotkey, p.32), in which case you would tap [Ctrl] twice. With this method, the [Ctrl] keys must be on the same side (both left, or both right).
The OSD incorporates a two level (Administrator / User) authorization system. Before the OSD Main Screen comes up, a dialog box appears that asks you to provide your Username and Password. If the Password Function has been set (see p. 33), you must provide them in order to access the OSD Main Screen. If this is the first time that the OSD is being run, or if the password function has not been set, simply press [Enter] when the authorization dialog
box appears. The OSD Main Screen comes up in Administrator Mode, with access to all functions. When you invoke the OSD, a screen similar to the one below appears:
27