Hotkey Port Control
Alternate OSD Invocation Keys: | Keyboard Platform Setup: |
The OSD activation method can be changed from tapping the Scroll Lock key twice to tapping the Ctrl key twice ([Ctrl] [Ctrl]). To change the OSD Invocation method, do the following:
1.Invoke HKM (see p. 19)
2.Press and release the T key
Note:
1.This procedure is a toggle between the two methods. To revert back to the original [Scroll Lock] [Scroll Lock] method, invoke HKM, then press and release the T key again.
2.For Mac systems we recommend using [Ctrl] [Ctrl] as the OSD invocation keys since Scroll Lock is used to emulate F14 in PC to Mac keyboard emulation (see p. 26).
The GCS1758’s default port settings are for a PC Compatible operating platform, and the US English keyboard language code. You can modify these for each port by bringing the KVM focus to the port you want to change and using the hotkey combinations shown in the table below.
The Hotkey entry method is as follows:
1.Invoke HKM (see p. 19)
2.Press and release the appropriate Function key (see table). After completing a setting, you automatically exit HKM.
Note: The brackets indicate the keys you should press. Simply press the indicated keys – do not type the brackets.
22