IOGear GCS1758 user manual Welcome

Page 3

Welcome

Thank you for purchasing the Miniview® Ultra+ KVM switch, one of the most versatile KVM switches on the market. The New Miniview® Ultra+ is much more than a simple eight-port KVM switch. The dual interface support allows you to connect both PS/2 and USB computers on the same switch. The multi- platform support allows you to control Windows-based computers, Sun Solaris systems, Linux, or even Macs by a single KVM switch. IOGEAR extended the multi-platform support by supporting the special keys on both Sun and Mac keyboards.

©2004 IOGEAR. All Rights Reserved. PKG-M0114

IOGEAR, the IOGEAR logo, MiniView® , VSE are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc. Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc. IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without notice. IOGEAR, Inc. assumes no responsibility for any inaccuracies or errors that may appear in this document.

Image 3
Contents MiniView Ultra+ Port Multi Platform KVM Switch Page Welcome Table of Contents Package Contents Overview Features Cables System RequirementsConsole ComputersFront View IntroductionIntroduciton Rear View Introduction Installation Single Stage InstallationBefore you Begin Installation Two Stage Installation Three Stage Installation Installation Operation Hot Plugging CPU PortsHot Plugging Console Ports Powering Off Port Selection Operation Hot Key Mode HKM Selecting the Active Port Hotkey Port AccessAuto Scan Mode Hotkey Port ControlAlternate Hotkey Invocation Keys Alternate OSD Invocation Keys Miscellaneous Hotkey SummaryTable Alternate Hotkey Invocation KeysSun Keyboard Keyboard EmulationMac Keyboard OSD Overview OSD OperationOSD Navigation OSD Main Screen Headings OSD Functions F2 List F1 GotoF3 SET Rights see p , for detailsOSD Operation OSD Operation F4 ADM OSD Operation F7 Scan F8 Lout BeforeYou Begin Firmware Upgrade UtilityStarting the Upgrade Firmware Upgrade Utility Firmware Upgrade Utility Upgrade Succeeded Upgrade Failed Firmware Upgrade Recovery Miniview Ultra+ ConnectionTables AppendixTroubleshooting Specifications Technical Support Radio & TV Interference Statement Limited Warranty Contact info