2.Press one of the INPUT SELECTOR buttons from 1 to 15 (this becomes the setup # in which the current status is stored). If in the CONFIRM mode, press the flashing TAKE button to confirm the action.
The memory stores the data at that reference.
7.4.2Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1.Press the RCL button. The RCL button flashes.
2.Press the appropriate INPUT SELECTOR button (the INPUT SELECTOR button # corresponding to the setup #). If in the CONFIRM mode, the setup flashes on the display and is only implemented after pressing the TAKE button.
The memory recalls the stored data from that reference.
To view the saved input/output configurations, set the
Press RCL followed by an INPUT SELECTOR button to display a configuration. To recall this configuration, press TAKE to select it. If not, repeat the above to display another configuration.
7.4.3Deleting an Input/Output Configuration
To delete an input/output configuration, do the following:
1.Press the STO and RCL buttons simultaneously. Both the STO and RCL buttons blink.
2.Press the appropriate INPUT SELECTOR button.
This erases that specific input/output configuration from the memory, leaving
it empty and available.
Storing a new configuration over a previous configuration (without deleting it first) replaces the previous configuration.
21 |