Kramer Electronics VP-1608 user manual RS-232 Window

Page 32

6.The Open File window opens. Select the correct HEX file that contains the updated version of the firmware for the VP-1608(for example 1608M_V1p2.hex) and click Open.

7.Press the keyboard shortcut key F3 (or select the “Communication/RS232” command from the Settings menu, or press the keys: Alt- SCR).

The “RS232” window appears. Change the COM port according to the configuration of your computer and select the 9600 baud rate:

Figure 17: RS-232 Window

8.Click Connect.

In the “Atmel – Flip” window, in the Operations Flow column, the Run button is active, and the name of the chip appears as the name of the third column: AT89C51RD2.

Verify that in the Buffer Information column, the “HEX File: VP1608.hex” appears.

Figure 18: Atmel – Flip Window (Connected)

28	VP-1608 - Flash Memory Upgrade

Image 32

Contents VP-1608 Page Contents Figures Introduction Getting Started Achieving the Best PerformanceOverview Defining the VP-1608 16x8 RGBHV/Balanced Audio MatrixVP 1608 Overview Feature Function Overview Flash Program Switch Installing in a Rack Connecting a Single VP-1608 Connecting the VP-1608 Connecting to the VP-1608 via RS-232 Connecting a PC or Controller to the RS-485 PortSetting the Machine # DIP-Switches Setting the Delay DIP-Switches Connecting Multiple VP-1608 Units Connecting via a PC or Serial ControllerConnecting via an RS-485 Controller Control Configuration via RS-232 and RS-485VP-1608 Connecting Multiple VP-1608 Units Using the Audio-Follow-Video or Breakaway Option Operating Your VP-1608 16x8 RGBHV/Balanced Audio MatrixSwitching OUT-IN Combinations To set the breakaway optionConfirming Settings Toggling between the AT Once and Confirm ModesStoring/Recalling Input/Output Configurations To store the current status in memory, do the followingTo recall an input/output configuration, do the following To delete an input/output configuration, do the followingAdjusting the Audio Gain Control Resetting the VP-1608 16x8 RGBHV/Balanced Audio MatrixLocking and Unlocking the Front Panel To lock the VP-1608Displaying Unit Characteristics Resetting to the Current StatusFlash Memory Upgrade Connecting the PC to the RS-232 PortDownloading from the Internet To download the up-to-date file from the InternetTo upgrade the firmware, follow these steps Upgrading the FirmwareAT89C51RD2 Click OK and select Load Hex from the File menu RS-232 Window If an error message Not Finished shows, click Run again Technical Specifications InputsTable of Hex Codes for Serial Communication VP-1608 Table of Hex Codes for Serial Communication Hex Tables for Audio Input/Output Gain Control Hex Tables for Audio Input Gain ControlInputs Hex Tables for Audio Output Gain Control VP-1608 Hex Tables for Audio Input/Output Gain Control Kramer Protocol Machine NumberVP-1608 Kramer Protocol Load Video Data VP-1608 Kramer Protocol Page 2900