7.1.1Setting the Audio-Follow-Video
To set the
•If the AUDIO and VIDEO configurations are the same, the AFV button illuminates. The audio follows the video
•If the AUDIO differs from the VIDEO, the TAKE and the AUDIO buttons flash. Also, the audio outputs in the INPUT STATUS
7.1.2Setting Breakaway
To set the breakaway option:
Press either the AUDIO (for audio control only) or the VIDEO (for video control only) button:
•If the AUDIO button illuminates, switching operations relate to audio
•If the VIDEO button illuminates, switching operations relate to video
7.2Switching OUT-IN Combinations
To switch a video/audio input to a video/audio output, do the following:
1.Press an OUTPUT SELECTOR button.
The corresponding input number in the INPUT STATUS
2.Press an INPUT SELECTOR button.
The selected input switches to the selected output.
For example, press the ALL button and then INPUT SELECTOR button # 2 to connect input # 2 to all the outputs.
18 |