Kramer Electronics VP-1608 user manual Storing/Recalling Input/Output Configurations

Page 24

7.3.2Confirming a Switching Action

To confirm a switching action (in CONFIRM mode), do the following:

1.Press an OUT-IN combination.

The corresponding input number that is displayed in the INPUT STATUS 7-segment display flashes. The TAKE button also flashes.

2.Press the flashing TAKE button to confirm the action.

The corresponding input number that is displayed in the INPUT STATUS 7-segment display no longer flashes. The TAKE button illuminates.

To confirm several actions (in CONFIRM mode), do the following:

1.Press each OUT-IN combination in sequence.

The corresponding input numbers that are displayed in the INPUT STATUS 7-segment display blink. The TAKE button also flashes.

2.Press the flashing TAKE button to confirm all the actions.

The corresponding input numbers that are displayed in the INPUT STATUS 7-segment display no longer blink. The TAKE button illuminates.

7.4Storing/Recalling Input/Output Configurations

You can store and recall up to 15 input/output configurations (or presets) in non-volatile memory, using the INPUT SELECTOR buttons 1 to 15. The 15 input/output configurations also include the relevant audio-follow-video/breakaway option definition, the video configurations, the audio configurations, the audio gain level for each of the 16 inputs, and the audio gain level for each of the eight outputs.

7.4.1Storing an Input/Output Configuration

To store the current status in memory, do the following:

1.Press the STO button. The STO button flashes.

20	VP-1608 - Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix

Image 24

Contents VP-1608 Page Contents Figures Introduction Getting Started Achieving the Best PerformanceOverview Defining the VP-1608 16x8 RGBHV/Balanced Audio MatrixVP 1608 Overview Feature Function Overview Flash Program Switch Installing in a Rack Connecting a Single VP-1608 Connecting the VP-1608 Connecting to the VP-1608 via RS-232 Connecting a PC or Controller to the RS-485 PortSetting the Machine # DIP-Switches Setting the Delay DIP-Switches Connecting Multiple VP-1608 Units Connecting via a PC or Serial ControllerConnecting via an RS-485 Controller Control Configuration via RS-232 and RS-485VP-1608 Connecting Multiple VP-1608 Units Using the Audio-Follow-Video or Breakaway Option Operating Your VP-1608 16x8 RGBHV/Balanced Audio MatrixSwitching OUT-IN Combinations To set the breakaway optionConfirming Settings Toggling between the AT Once and Confirm ModesStoring/Recalling Input/Output Configurations To store the current status in memory, do the followingTo recall an input/output configuration, do the following To delete an input/output configuration, do the followingAdjusting the Audio Gain Control Resetting the VP-1608 16x8 RGBHV/Balanced Audio MatrixLocking and Unlocking the Front Panel To lock the VP-1608Displaying Unit Characteristics Resetting to the Current StatusFlash Memory Upgrade Connecting the PC to the RS-232 PortDownloading from the Internet To download the up-to-date file from the InternetTo upgrade the firmware, follow these steps Upgrading the FirmwareAT89C51RD2 Click OK and select Load Hex from the File menu RS-232 Window If an error message Not Finished shows, click Run again Technical Specifications InputsTable of Hex Codes for Serial Communication VP-1608 Table of Hex Codes for Serial Communication Hex Tables for Audio Input/Output Gain Control Hex Tables for Audio Input Gain ControlInputs Hex Tables for Audio Output Gain Control VP-1608 Hex Tables for Audio Input/Output Gain Control Kramer Protocol Machine NumberVP-1608 Kramer Protocol Load Video Data VP-1608 Kramer Protocol Page 2900