Kramer Electronics user manual VP-1608 Kramer Protocol

	INSTRUCTION	DEFINITION FOR SPECIFIC INSTRUCTION				NOTE
	DESCRIPTION	INPUT			OUTPUT
0	RESET VIDEO	0	0			1
1	SWITCH VIDEO	Set equal to video input which is	Set equal to video output which is to be			2, 15
		to be switched	switched
		(0 = disconnect)	(0 = to all the outputs)
2	SWITCH AUDIO	Set equal to audio input which is	Set equal to audio output which is to be			2
		to be switched	switched
		(0 = disconnect)	(0 = to all the outputs)
3	STORE VIDEO STATUS	Set as SETUP #	0	- to store		2, 3, 15
			1	- to delete
4	RECALL VIDEO STATUS	Set as SETUP #	0			2, 3, 15
5	REQUEST STATUS OF A	Set as SETUP #	Equal to output number whose status is			4, 3
	VIDEO OUTPUT		reqd
6	REQUEST STATUS OF	Set as SETUP #	Equal to output number whose status is			4, 3
	AN AUDIO OUTPUT		reqd
8	BREAKAWAY SETTING	0	0	- audio-follow-video		2
			1	- audio breakaway
		1	0	- FOLLOW mode		15
			1	- Normal mode
11	REQUEST BREAKAWAY	Set as SETUP #, or set to 126 or	0	- Request audio breakaway setting		3, 4, 6,
	SETTING	127 to request if machine has this	1	- Request “FOLLOW” setting		15
		function
12	REQUEST VIDEO/AUDIO	Set as SETUP #, or set to 126 or	0	- for video		3, 4, 6
	TYPE SETTING	127 to request if machine has this	1	- for audio
		function	2	- for VGA
15	REQUEST WHETHER	Set as SETUP #	0			8
	SETUP IS DEFINED
16	ERROR/BUSY	0	0	- error		9
			1	- invalid instruction
			2	- out of range
			3	- machine busy
17	RESERVED	- - - -	- - - -			10
18	RESET AUDIO	0	0			1
19	STORE AUDIO STATUS	Set as SETUP #	0	- to store		2, 3
			1	- to delete
20	RECALL AUDIO STATUS	Set as SETUP #	0			2, 3
22	SET AUDIO PARAMETER	Equal to input/output number	Set as parameter value			2, 11, 23
		whose gain is to be set (0 = all)
24	INCREASE/DECREASE	Equal to input/output number	0		- increase output	23
	AUDIO PARAMETER	whose parameter is to be	1		- decrease output
		increased/decreased (0 = all)	2		- increase left output
			3		- decrease left output
			4		- increase right output
			5		- decrease right output
			6		- increase input
			7		- decrease input
			8		- increase left input
			9		- decrease left input
			10 - increase right input
			11 - decrease right input
25	REQUEST AUDIO	Equal to input/output number	0			6, 23
	PARAMETER	whose parameter is requested
30	LOCK FRONT PANEL	0 - Panel unlocked	0			2
		1 - Panel locked
31	REQUEST WHETHER	0	0			16
	PANEL IS LOCKED
42	AUDIO PARAMETER	INPUT Bit:	0		- Gain	23
	SETTINGS FOR	I0 - 0=input; 1=output	1		- Bass
	INSTRUCTIONS 22, 24, 25	I1 - Left	2		- Treble
		I2 - Right	3		- Midrange
57	SET AUTO-SAVE	I3 - no save	0			12, 2
		I4 - auto-save

38 VP-1608 - Kramer Protocol 2000