Linksys EFG120 Getting to Know the Network Attached Storage, Before removing the power adapter

Page 11

EtherFast Network Attached Storage (120GB with PrintServer)

Chapter 2: Getting to Know the Network Attached Storage

The Back Panel

The Network Attached Storage’s ports and Reset button are located on the back panel.

	Figure 2-1: Back Panel
LAN Port	This LAN (Local Area Network) port connects to an Ethernet network device, such
	as a switch or router. (You can also connect the Network Attached Storage directly
	to a computer.)
PRINTER Port	The PRINTER port connects to a printer using a parallel cable.
Reset Button	This button is used to reset the Network Attached Storage’s IP address and
	password to their factory defaults.
	Press and hold this button for three seconds. The IP address will be reset to the
	default value of 192.168.1.77, with a subnet mask of 255.255.255.0, and the
	password will be reset to its default, admin. After the reset has occurred, the
	Network Attached Storage will beep once.
POWER Port	Connect the power adapter here.

		IMPORTANT: Never remove the power adapter while the Network
		Attached Storage is powered on. Make sure you press the power
		button on the front panel to power off the Network Attached Storage
		before removing the power adapter.
Chapter 2: Getting to Know the Network Attached Storage				4

The Back Panel

Image 11

Contents Network Attached Storage Copyright and Trademarks How to Use this GuideTable of Contents EtherFast Network Attached Storage 120GB with PrintServer Back Panel List of Figures25 Copy Files Screen Figure B-4 Insert Screw through Left Side of Tray Welcome IntroductionWhat’s in this User Guide? EtherFast Network Attached Storage 120GB with PrintServer Getting to Know the Network Attached Storage Before removing the power adapterLAN Minutes after the first beep Beeper CodesConnect the Ethernet Network Cable Connecting the Network Attached StorageOverview Setting Up the Network Attached StorageSetup Wizard IP Settings Screen Time and Date Settings Screen Review Settings Screen 12 BrightStor ARCserve Backup Welcome Screen Installation of BrightStor ARCserve Backup for Windows14 Customer Information Screen 16 Select Install Type Screen 17 Select Products Screen 19 Set Password Screen 21 Product List Screen 23 Licensing Information Screen 26 Install Summary Screen 27 Registration Screen 32 Purchase Software Screen GigaDrive Status Configuring the Network Attached StorageAccess to the Web-based Utility Home Tab User Log in Private Data Home Tab Disk 1 Public Data or Disk 2 Public DataIP Address LAN SettingsDNS Server Dhcp ServerLocation System InformationIdentification Secure IP Address OptionsProperties Administration Tab UsersUsers Information Existing UsersSystem Administration Tab StatusUser Membership Mail Alerts PrinterDisk Existing Groups Administration Tab Advanced GroupsGroup Information New GroupExisting Shares Administration Tab Advanced SharesShares Information Config Backup Administration Tab Advanced BackupBackup Settings Data BackupSelf-test S.M.A.R.T Administration Tab Advanced DiskDisk Settings Format DiskStandby DefragUser Guide Tab Administration Tab Advanced UpgradeAdministration Tab Advanced Setup Upgrade SettingsAppendix a Troubleshooting Print job does not print and no error message is displayed Figure B-2 Attach Power Cable Appendix B Installing a Second Hard DriveFigure B-4 Insert Screw through Left Side Tray Figure B-6 Access the Web-based Utility Figure B-7 Format Disk Figure C-1 Click Start Button Appendix C Setting Up the Built-in PrintServerFigure C-4 Welcome to the Add Printer Wizard Screen Figure C-5 Local or Network Printer Screen Figure C-8 Select Your Printer Figure C-10 Change Printer Properties Network Neighborhood/My Network Places Appendix D Windows HelpShared Resources Appendix E Glossary EtherFast Network Attached Storage 120GB with PrintServer 10/100/1000 Mbps RJ-45, 1 DB-25 Parallel Port Appendix F SpecificationsLimited Warranty Appendix G Warranty InformationFCC Statement Appendix H Regulatory InformationInformation section in this Guide Appendix I Contact InformationNeed to contact Linksys?