Linksys EFG120 manual Figure B-6 Access the Web-based Utility

Page 48

EtherFast Network Attached Storage (120GB with PrintServer)

8.Insert a screw through the tray’s right side and into your hard drive. To tighten it and secure the drive to the tray on the right side, you will need a narrow screwdriver that fits through the hole.

9.Slide the drive into the second drive bay.

10.Lock the tray into the Network Attached Storage’s bay. The tray must be locked in for the Network Attached Storage to function properly.

11.Plug the power adapter into the Network Attached Storage. Then power it back on.

12.Open your networked computer’s web browser.

Figure B-5: Insert Screw through

Right Side of Tray

13. Enter http://192.168.1.77 in the Address field and press the Enter key.

Figure B-6: Access the Web-based Utility

Appendix B: Installing a Second Hard Drive

41

Image 48

Contents Network Attached Storage How to Use this Guide Copyright and TrademarksTable of Contents EtherFast Network Attached Storage 120GB with PrintServer List of Figures Back Panel25 Copy Files Screen Figure B-4 Insert Screw through Left Side of Tray Introduction WelcomeWhat’s in this User Guide? EtherFast Network Attached Storage 120GB with PrintServer Before removing the power adapter Getting to Know the Network Attached StorageLAN Beeper Codes Minutes after the first beepConnecting the Network Attached Storage Connect the Ethernet Network CableSetting Up the Network Attached Storage Setup WizardOverview IP Settings Screen Time and Date Settings Screen Review Settings Screen Installation of BrightStor ARCserve Backup for Windows 12 BrightStor ARCserve Backup Welcome Screen14 Customer Information Screen 16 Select Install Type Screen 17 Select Products Screen 19 Set Password Screen 21 Product List Screen 23 Licensing Information Screen 26 Install Summary Screen 27 Registration Screen 32 Purchase Software Screen Configuring the Network Attached Storage Access to the Web-based UtilityGigaDrive Status Home Tab Disk 1 Public Data or Disk 2 Public Data Home Tab User Log in Private DataLAN Settings IP AddressDhcp Server DNS ServerSystem Information IdentificationLocation Options Secure IP AddressAdministration Tab Users Users InformationExisting Users PropertiesAdministration Tab Status User MembershipSystem Printer DiskMail Alerts Administration Tab Advanced Groups Group InformationNew Group Existing GroupsAdministration Tab Advanced Shares Shares InformationExisting Shares Administration Tab Advanced Backup Backup SettingsData Backup Config BackupAdministration Tab Advanced Disk Disk SettingsFormat Disk Self-test S.M.A.R.TDefrag StandbyAdministration Tab Advanced Upgrade Administration Tab Advanced SetupUpgrade Settings User Guide TabAppendix a Troubleshooting Print job does not print and no error message is displayed Appendix B Installing a Second Hard Drive Figure B-2 Attach Power CableFigure B-4 Insert Screw through Left Side Tray Figure B-6 Access the Web-based Utility Figure B-7 Format Disk Appendix C Setting Up the Built-in PrintServer Figure C-1 Click Start ButtonFigure C-4 Welcome to the Add Printer Wizard Screen Figure C-5 Local or Network Printer Screen Figure C-8 Select Your Printer Figure C-10 Change Printer Properties Appendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix E Glossary EtherFast Network Attached Storage 120GB with PrintServer Appendix F Specifications 10/100/1000 Mbps RJ-45, 1 DB-25 Parallel PortAppendix G Warranty Information Limited WarrantyAppendix H Regulatory Information FCC StatementAppendix I Contact Information Need to contact Linksys?Information section in this Guide