Linksys EFG120 manual Appendix B Installing a Second Hard Drive, Figure B-2 Attach Power Cable

Page 46

EtherFast Network Attached Storage (120GB with PrintServer)

Appendix B: Installing a Second Hard Drive

NOTE: The Network Attached Storage support IDE Ultra DMA (or UDMA) hard drives with a throughput of 33-66Mbps (ATA/33, ATA/66) and a rotation speed of 5400 or 7200 rpms.

When you are ready to install a second hard drive into the Network Attached Storage, follow these instructions:

1.Power down the Network Attached Storage by pressing the power button on the front panel. Then unplug the power adapter from the Network Attached Storage.

2.Unlock the second drive bay. This bay is empty and will hold your new drive.

3.Make sure that your hard drive’s master/slave jumpers are set to Cable Select before putting it in the drive tray. For instructions on these jumper settings, refer to the documentation included with your hard drive.

4.Attach the IDE cable from the drive tray to your hard drive. (The IDE cable is the wider of the two cables in the drive tray.) Make sure you plug this securely into your hard drive.

Figure B-1: Attach IDE Cable

5.Attach the power cable from the drive tray to your hard drive. (The power cable is the smaller of the two cables in the drive tray.) Make sure you plug this securely into your hard drive.

	Figure B-2: Attach Power Cable
Appendix B: Installing a Second Hard Drive	39

Image 46

Contents Network Attached Storage How to Use this Guide Copyright and TrademarksTable of Contents EtherFast Network Attached Storage 120GB with PrintServer List of Figures Back Panel25 Copy Files Screen Figure B-4 Insert Screw through Left Side of Tray Introduction WelcomeWhat’s in this User Guide? EtherFast Network Attached Storage 120GB with PrintServer Before removing the power adapter Getting to Know the Network Attached StorageLAN Beeper Codes Minutes after the first beepConnecting the Network Attached Storage Connect the Ethernet Network CableSetup Wizard Setting Up the Network Attached StorageOverview IP Settings Screen Time and Date Settings Screen Review Settings Screen Installation of BrightStor ARCserve Backup for Windows 12 BrightStor ARCserve Backup Welcome Screen14 Customer Information Screen 16 Select Install Type Screen 17 Select Products Screen 19 Set Password Screen 21 Product List Screen 23 Licensing Information Screen 26 Install Summary Screen 27 Registration Screen 32 Purchase Software Screen Access to the Web-based Utility Configuring the Network Attached StorageGigaDrive Status Home Tab Disk 1 Public Data or Disk 2 Public Data Home Tab User Log in Private DataLAN Settings IP AddressDhcp Server DNS ServerIdentification System InformationLocation Options Secure IP AddressExisting Users Administration Tab UsersUsers Information PropertiesUser Membership Administration Tab StatusSystem Disk PrinterMail Alerts New Group Administration Tab Advanced GroupsGroup Information Existing GroupsShares Information Administration Tab Advanced SharesExisting Shares Data Backup Administration Tab Advanced BackupBackup Settings Config BackupFormat Disk Administration Tab Advanced DiskDisk Settings Self-test S.M.A.R.TDefrag StandbyUpgrade Settings Administration Tab Advanced UpgradeAdministration Tab Advanced Setup User Guide TabAppendix a Troubleshooting Print job does not print and no error message is displayed Appendix B Installing a Second Hard Drive Figure B-2 Attach Power CableFigure B-4 Insert Screw through Left Side Tray Figure B-6 Access the Web-based Utility Figure B-7 Format Disk Appendix C Setting Up the Built-in PrintServer Figure C-1 Click Start ButtonFigure C-4 Welcome to the Add Printer Wizard Screen Figure C-5 Local or Network Printer Screen Figure C-8 Select Your Printer Figure C-10 Change Printer Properties Shared Resources Appendix D Windows HelpNetwork Neighborhood/My Network Places Appendix E Glossary EtherFast Network Attached Storage 120GB with PrintServer Appendix F Specifications 10/100/1000 Mbps RJ-45, 1 DB-25 Parallel PortAppendix G Warranty Information Limited WarrantyAppendix H Regulatory Information FCC StatementNeed to contact Linksys? Appendix I Contact InformationInformation section in this Guide