Delta SLC-500, PLC-5, 1770-KF2 user manual Serial Port Configuration for DeltaV Psic

Page 18

Powerful Solutions for Digital Plants

4.4Serial Port Configuration for DeltaV PSIC

In order for proper communication between the Programmable Serial Interface Card and the Allen-Bradley PLC, the serial port settings on both devices must be configured properly.

The PSIC serial port can be configured via a combination of the following settings through the DeltaV Explorer Menu using the Properties box.

￿￿

Protocol Type

Custom

￿￿

Mode

Master

￿￿

Retry Count

0 to 255

￿￿

Message time-out

100 to 25500ms

￿￿

Transmit Delay

0 to 25500ms

￿￿ Send Outputs on Startup

Yes or No

￿￿

Port Type

RS-232, RS-422/485 Half - Duplex, RS -

 

 

422/485 Full - Duplex

￿￿

Baud Rate

300, 1200, 2400, 4800, 9600, 38400

 

 

57600, 115200

￿￿

Parity

None, Even or Odd

￿￿

Data Bits

7or 8

MYNAH Technologies ￿ 504 Trade Center Blvd. ￿ Chesterfield, MO 63005 ￿ Telephone 636 681-1555 ￿ Fax 636 681-1660

www.mynah.com

17

Image 18
Contents May Rev. P1.7 Introduction ScopeSystem Specifications Document FormatRelated Documents Firmware Protocol Compatibility Software RequirementsTheory of Operation Powerful Solutions for Digital Plants Downloading the firmware Configuration Information Channel Attributes Block of PsicDeviceDataType Device And Dataset Configuration SpecialData4DeviceDataType Types 0 3 Basic Commands Powerful Solutions for Digital Plants Powerful Solutions for Digital Plants Dataset Configuration Display Powerful Solutions for Digital Plants Powerful Solutions for Digital Plants Serial Port Configuration for DeltaV Psic Verify Configuration Verify Hardware and Software Version NumberVerify I/O Communication With Control Studio Using Diagnostics LED IndicationDeltaV PLC/SLC Electrical Interface Port 1 Half Duplex Data+/Full Wiring Connections for RS-232 Communications GND TXD RXD DTR DSR DCD RTS CTSGND TXD RXD DTR DSR RTS CTS KE Module Series a Switch Settings KE Module Series B Switch Settings1770-KF2 Module Switch Settings