Dukane 401-8755E-01 user manual Image Menu, Over Scan, Position, Phase

Page 32

IMAGE Menu

IMAGE Menu

With the IMAGE menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

72

*215+6+10

%4''

*#5'



126+10

5+<'



'#5;/'07

#76 #&,756 ':'%76'

 

 

Item

Description

 

 

 

Using the buttons ▲/▼ switches the mode for aspect ratio.

 

For an RGB signal

 

NORMAL ó 4:3 ó 16:9 ó SMALL

ASPECT

For a video signal, s-video signal or component video signal

4:3 ó 16:9 ó 14:9 ó SMALL

 

 

For a no signal

 

4:3 (fixed)

 

• The NORMAL mode keeps the original aspect ratio of the signal.

 

Using the buttons ▲/▼ adjusts the over-scan ratio.

OVER SCAN

Large (It reduces picture) ó Small (It magnifies picture)

• This item can be selected only for a video, s-video and component signal.

 

• When this adjustment is too large, certain degradation may appear

 

at the frame area of the picture. In such a case, please adjust small.

 

Using the buttons ▲/▼ adjusts the vertical position.

 

Up ó Down

 

Over-adjusting the vertical position may cause noise to appear

V POSITION

on the screen. If this occurs please reset the vertical position to the

default setting. Pressing the RESET button when V POSITION is

 

selected will reset the V POSITION to the default setting.

 

For a video signal, s-video signal or component video signal

 

The adjustable range of V.POSITION depends on the OVERSCAN setting.

 

It is not possible to adjust when the OVERSCAN is set to 10.

 

Using the buttons ▲/▼ adjusts the horizontal position.

 

Left ó Right

 

Over-adjusting the horizontal position may cause noise to appear

H POSITION

on the screen. If this occurs please reset the horizontal position to

the default setting. Pressing the RESET button when H POSITION

 

is selected will reset the H POSITION to the default setting.

 

For a video signal, s-video signal or component video signal

 

The adjustable range of H.POSITION depends on the OVERSCAN setting.

 

It is not possible to adjust when the OVERSCAN is set to 10.

 

Using the buttons ▲/▼ adjusts the horizontal phase to eliminate flicker.

H PHASE

Right ó Left

• This item can be selected only for an RGB signal or a component

 

 

video signal.

30

Image 32
Contents Model 8755E Page Trademark acknowledgment About this manualThank you for purchasing this projector Content Fastening the lens cover Projector featuresPreparations Part names ProjectorPower switch  AC inlet RGB OUT port  Video ports Remote control Control buttonsSetting up Arrangement Min Max DownAdjusting the projectors elevator Elevator feet Elevator buttonSecurity Bar Anti-theft chain or wire sold separately Using the Security BarHow to attach Connecting your devices About Plug-and-Play capabilityConnecting to a monitor output Connecting to a speaker with amplifier outputExamples of connection with a computer RS-232C USBCR/PR Examples of connection with a VCR/DVD playerCB/PB Connecting power supply AC inlet Connector Power cordRemote control Putting batteriesUsing the remote control Changing the signal setting for the projectors remote sensorPower on/off Turning on the powerTurning off the power Off. Attach the lens coverAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Adjusting the zoom and focusSelecting an input signal Selecting an aspect ratioUsing the automatic adjustment feature Adjusting the position For a video signal or s-video signal  For a component video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenAvailable function Remote control operation Operating the computer screenUSB mouse and keyboard control Move pointerMultifunctional settings Using the menu functionMenu button Enter button Cursor buttons Reset button Easy MenuEasy Menu Easy Menu Gamma Adjust the level using the buttonsPicture Menu Picture Menu Color TempMY Memory Phase Image MenuOver Scan PositionFor a video signal or s-video signal Auto AdjustFor a component video signal Image MenuInput Menu ProgressiveVideo NR Color SpaceInput Menu ComponentVideo Format Frame LockCustom Resolution Setup Menu Setup Menu Using the buttons / switches the mode for mirror statusVolume AudioBlank Screen MenuMenu Position MyScreen Lock Screen MenuStart UP Message Auto on Option MenuAuto Search Option Menu Auto OFFLamp Time MY ButtonService FAN SpeedGhost Filter MessageFactory Reset Remote FreqUse the / button to change the Projectors remote sensor InformationUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function Description If you have forgotten your PasswordTurning on the MyScreen Password Function Setting the PasswordRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off Turning Off the PIN Lock Function If you have forgotten your PIN CodeTurning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password Setting the Transition Detector off Maintenance LampCase of replacement by yourself LampType number = 456-8755E Lamp cover Screw Screws HandleHandle Filter cover Air filterType number = NJ22222 Air filter Air filter’s knobPage Troubleshooting There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Electrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Signal source does not correctly workVolume is adjusted to an extremely low level Audio setting is not correctColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Either the focus and/or horizontal phase settings areWhisper function is working Lamp is approaching the end of its product LifetimeWarranty and after-service SpecificationsSpecifications Example of computer signal TechnicalInitial set signals Connection to the ports 75Ω terminated positiveComponent Video D Y, E CB/PB, F CR/PR ±0.1Vp-p, 75Ω terminator200mVrmsmax kΩ termination 200mVrmsmax kΩ output impedanceConnecting the cable Communications settingCommand data ProtocolRequesting projector status Get command Changing the projector settings Set commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandRS-3C Communication CRC Be EF EA F5 Be EF CE D6 CB D6 Pуcckий Be EF 08 D3 RGB1 Page Page Audio Visual Products