Dukane 401-8755E-01 user manual Option Menu, Auto OFF, Lamp Time, MY Button

Page 43

OPTION Menu

OPTION Menu (continued)

Item

 

Description

 

 

 

Using the buttons ▲/▼ adjusts the time to count down to

 

automatically turn the projector off.

 

Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)

 

AUTO OFF

AUTO OFF

 

ENABLE

DISABLE

 



0

AUTO OFF

When the time is set to 0, the projector is not turned off automatically.

When the time is set to 1 to 99, and when the passed time with no-

 

signal or an unsuitable signal reaches at the set time, the projector

 

lamp will be turned off.

 

 

If one of the projector's buttons or the remote control buttons

 

is pressed or one of the commands (except get commands) is

 

transmitted from the control port during the corresponding time,

 

projector will not be turned off.

 

Please refer to the section “Turning off the power” (17).

 

The lamp time is the time counted after the last resetting. It is

 

shown in the OPTION menu as the usage time of the lamp.

 

Pressing the RESET button on the remote control or the button ►

 

of the projector displays a dialog. To reset the lamp time, select the

LAMP TIME

RESET using the button ▲.

 

 

RESET ï CANCEL

 

•Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

•For the lamp replacement, see the section "Lamp" (50, 51).

 

The filter time is the time counted after the last resetting. It is shown

 

in the OPTION menu as the usage time of the air filter.

 

Pressing the RESET button on the remote control or the button ► of the

 

projector displays a dialog. To reset the filter time, select the RESET using

FILTER TIME

the button ▲.

 

RESET ï CANCEL

 

• Please reset the filter time only when you have cleaned or replaced

 

the air filter, for a suitable indication about the air filter.

 

• For the air filter cleaning, see the section "Air filter" (52, 53).

Sets the assigned function for the MY BUTTON1 and 2 buttons on the included remote control.

•RGB1: Sets port to RGB1.

•RGB2: Sets port to RGB2.

•COMPONENT: Sets port to COMPONENT.

•S-VIDEO: Sets port to S-VIDEO.

MY BUTTON

• VIDEO: Sets port to VIDEO.

• INFORMATION: Displays INPUT INFORMATION (43).

 

•AUTO KEYSTONE EXECUTE: Performs automatic KEYSTONE correction (35).

•MY MEMORY: Loads MY MEMORY settings (29).

•PICTURE MODE: Changes the PICTURE mode (25).

•FILTER RESET: Displays the filter time reset confirmation dialogue

(41).

41

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Model 8755E Page Thank you for purchasing this projector About this manualTrademark acknowledgment Content Preparations Projector featuresFastening the lens cover Projector Part namesVideo ports  Power switch AC inlet  RGB OUT port Control buttons Remote controlSetting up Min Max Down ArrangementElevator feet Elevator button Adjusting the projectors elevatorHow to attach Using the Security BarSecurity Bar Anti-theft chain or wire sold separately About Plug-and-Play capability Connecting your devicesRS-232C USB Connecting to a monitor outputConnecting to a speaker with amplifier output Examples of connection with a computerCB/PB Examples of connection with a VCR/DVD playerCR/PR AC inlet Connector Power cord Connecting power supplyPutting batteries Remote controlChanging the signal setting for the projectors remote sensor Using the remote controlOff. Attach the lens cover Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal OperatingSelecting an aspect ratio Searching an input signalAdjusting the zoom and focus Selecting an input signal For a component video signal Using the automatic adjustment featureAdjusting the position  For a video signal or s-video signalCorrecting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenMove pointer Available function Remote control operationOperating the computer screen USB mouse and keyboard controlEasy Menu Multifunctional settingsUsing the menu function Menu button Enter button Cursor buttons Reset buttonEasy Menu Easy Menu Picture Menu Adjust the level using the buttonsGamma Color Temp Picture MenuMY Memory Position PhaseImage Menu Over ScanImage Menu For a video signal or s-video signalAuto Adjust For a component video signalColor Space Input MenuProgressive Video NRFrame Lock Input MenuComponent Video FormatCustom Resolution Setup Menu Audio Setup MenuUsing the buttons / switches the mode for mirror status VolumeMenu Position Screen MenuBlank Start UP Screen MenuMyScreen Lock Message Auto Search Option MenuAuto on MY Button Option MenuAuto OFF Lamp TimeFilter Message ServiceFAN Speed GhostInformation Factory ResetRemote Freq Use the / button to change the Projectors remote sensorSecurity Using Security FeaturesInputting the Password Changing the PasswordSetting the Password Using the MyScreen Password FunctionDescription If you have forgotten your Password Turning on the MyScreen Password FunctionTurning the Password off Using the PIN Lock FunctionRegistering the PIN Code If you have forgotten your PIN Code Turning Off the PIN Lock FunctionSetting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Setting the Transition Detector off Lamp MaintenanceLamp cover Screw Screws Handle Case of replacement by yourselfLamp Type number = 456-8755EType number = NJ22222 Air filterHandle Filter cover Air filter’s knob Air filterPage Related messages TroubleshootingThere is no input signal Internal temperature is risingRegarding the indicator lamps Regarding the indicator lamps Signal source does not correctly work Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connectedColor Space setting is not suitable Volume is adjusted to an extremely low levelAudio setting is not correct Color settings are not correctly adjustedLamp is approaching the end of its product Lifetime Not properly adjustedEither the focus and/or horizontal phase settings are Whisper function is workingSpecifications Warranty and after-serviceSpecifications Technical Example of computer signalInitial set signals 75Ω terminated positive Connection to the ports±0.1Vp-p, 75Ω terminator Component Video D Y, E CB/PB, F CR/PR200mVrmsmax kΩ output impedance 200mVrmsmax kΩ terminationProtocol Connecting the cableCommunications setting Command dataIncreasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset CommandRS-3C Communication CRC Be EF EA F5 Be EF CE D6 CB D6 Pуcckий Be EF 08 D3 RGB1 Page Page Audio Visual Products
Top Page Image Contents