Dukane 401-8755E-01 user manual Message

Page 41

58+&'1864%#/'4#

SOURCE NAME MENU *Right side of the menu is blank until a name is specified

SCREEN Menu

SCREEN Menu (continued)

Item

Description

Using the buttons ▲/▼ turns on/off the message function.

TURN ON ó TURN OFF

	When the TURN ON is selected, the following message function works.
	“AUTO IN PROGRESS” while automatically adjusting
	”NO INPUT IS DETECTED”
	”SYNC IS OUT OF RANGE”
	"Searching….” while searching for the input
MESSAGE	”Detecting….” while an input signal is detected
	The indication of the input signal displayed by changing
	The indication of the aspect ratio displayed by changing
	The indication of the My Memory displayed by changing
	The indication of the Picture Mode displayed by changing
	The indication of "FREEZE" and "II" while freezing the screen by
	pressing the FREEZE button.

•When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (22).

Each input port for this projector can have a name applied to it.

(1) Use the ▲/▼ buttons on the SCREEN

menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu will be displayed.

(2) Use the ▲/▼ buttons on the SCREEN NAME menu to select the port to be named and press the ► button. The SOURCE NAME dialog will be displayed.


SOURCE NAME name can be a maximum of 16 characters.		'5%		'06'4 0':6
Once a character in the name is selected		'5%37+6
(3) The current name will be displayed
on the first line. Use the ◄/►/▲/▼ and
ENTER or INPUT buttons to select and
enter characters. The RESET button can			Q R S T U V W X Y Z [ \
be used to erase 1 character at a time. The			A !
(4) To change an already inserted character,			Q R AS TUV!WXYZ[\
buttons to select character to be changed.
press the ▲ button while the cursor is on the			C D E F G H I J K L M NOP
[A-N] row to move the cursor to the name
displayed on the first line and use the ◄/►
use the ▼ button to move the cursor back
down to the character entry area to select
and enter characters as described above.			C D E F G H I J K L M N O P

			A !	'06'40':6
		'5%37+6
(5) Select	and press the ENTER or
INPUT buttons when finished entering text.			Q R S T U V W X Y Z[\
To revert to the previous name without
saving changes press the ESC or ◄ button
and the INPUT button simultaneously.
				39

Image 41

Contents Model 8755E Page Trademark acknowledgment About this manualThank you for purchasing this projector Content Fastening the lens cover Projector featuresPreparations Projector Part namesAC inlet  Power switch RGB OUT port  Video ports Control buttons Remote controlSetting up Min Max Down ArrangementElevator feet Elevator button Adjusting the projectors elevatorSecurity Bar Anti-theft chain or wire sold separately Using the Security BarHow to attach About Plug-and-Play capability Connecting your devicesConnecting to a speaker with amplifier output Connecting to a monitor outputExamples of connection with a computer RS-232C USBCR/PR Examples of connection with a VCR/DVD playerCB/PB AC inlet Connector Power cord Connecting power supplyPutting batteries Remote controlChanging the signal setting for the projectors remote sensor Using the remote controlTurning on the power Power on/offTurning off the power Off. Attach the lens coverSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Searching an input signalSelecting an input signal Selecting an aspect ratioAdjusting the position Using the automatic adjustment feature For a video signal or s-video signal  For a component video signalCorrecting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenOperating the computer screen Available function Remote control operationUSB mouse and keyboard control Move pointerUsing the menu function Multifunctional settingsMenu button Enter button Cursor buttons Reset button Easy MenuEasy Menu Easy Menu Gamma Adjust the level using the buttonsPicture Menu Color Temp Picture MenuMY Memory Image Menu PhaseOver Scan PositionAuto Adjust For a video signal or s-video signalFor a component video signal Image MenuProgressive Input MenuVideo NR Color SpaceComponent Input MenuVideo Format Frame LockCustom Resolution Setup Menu Using the buttons / switches the mode for mirror status Setup MenuVolume AudioBlank Screen MenuMenu Position MyScreen Lock Screen MenuStart UP Message Auto on Option MenuAuto Search Auto OFF Option MenuLamp Time MY ButtonFAN Speed ServiceGhost Filter MessageRemote Freq Factory ResetUse the / button to change the Projectors remote sensor InformationInputting the Password Using Security FeaturesChanging the Password SecurityDescription If you have forgotten your Password Using the MyScreen Password FunctionTurning on the MyScreen Password Function Setting the PasswordRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off If you have forgotten your PIN Code Turning Off the PIN Lock FunctionTurning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password Setting the Transition Detector off Lamp MaintenanceLamp Case of replacement by yourselfType number = 456-8755E Lamp cover Screw Screws HandleHandle Filter cover Air filterType number = NJ22222 Air filter’s knob Air filterPage There is no input signal TroubleshootingInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Power switch is not set to the on position Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workAudio setting is not correct Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitableEither the focus and/or horizontal phase settings are Not properly adjustedWhisper function is working Lamp is approaching the end of its product LifetimeSpecifications Warranty and after-serviceSpecifications Technical Example of computer signalInitial set signals 75Ω terminated positive Connection to the ports±0.1Vp-p, 75Ω terminator Component Video D Y, E CB/PB, F CR/PR200mVrmsmax kΩ output impedance 200mVrmsmax kΩ terminationCommunications setting Connecting the cableCommand data ProtocolChanging the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandRS-3C Communication CRC Be EF EA F5 Be EF CE D6 CB D6 Pуcckий Be EF 08 D3 RGB1 Page Page Audio Visual Products