Dukane 401-8755E-01 Image Menu, Size, For a video signal or s-video signal, Auto Adjust

Page 33

IMAGE Menu

IMAGE Menu (continued)

Item

Description

 

 

 

Using the buttons ▲/▼ adjusts the horizontal size.

 

Large ó Small

H SIZE

• This item can be selected only for an RGB signal.

• When this adjustment is excessive, the picture may not be

 

 

displayed correctly. In such a case, please reset the adjustment

 

by pressing the RESET button on the remote control during this

 

operation.

 

Selecting this item performs the automatic adjustment feature.

 

For an RGB signal

 

The vertical position, the horizontal position, the horizontal phase

 

and the horizontal size will be automatically set to default. And the

 

aspect ratio will be automatically selected.

 

Make sure that the application window is set to its maximum size

 

prior to attempting to use this feature. A dark picture may still be

 

incorrectly adjusted. Use a bright picture when adjusting.

 

For a video signal or s-video signal

AUTO ADJUST

The video format best suited for the respective input signal will be

selected automatically.

EXECUTE

This function is available only when the AUTO mode is selected to

 

the VIDEO FORMAT item in the INPUT menu. For a component

 

video signal, the signal type is identified automatically independently

 

of this function.

 

For a video signal, s-video signal or component video signal

 

The vertical position, horizontal position and aspect ratio will be

 

automatically set to default.

 

For a component video signal

 

The horizontal phase will be automatically set to default.

 

• The automatic adjustment operation requires about 10 seconds.

 

Also please note that it may not function correctly with some input.

31

Image 33
Contents Model 8755E Page About this manual Thank you for purchasing this projectorTrademark acknowledgment Content Projector features PreparationsFastening the lens cover Projector Part namesAC inlet  Power switch RGB OUT port  Video ports Control buttons Remote controlSetting up Min Max Down ArrangementElevator feet Elevator button Adjusting the projectors elevatorUsing the Security Bar How to attachSecurity Bar Anti-theft chain or wire sold separately About Plug-and-Play capability Connecting your devicesConnecting to a speaker with amplifier output Connecting to a monitor outputExamples of connection with a computer RS-232C USBExamples of connection with a VCR/DVD player CB/PBCR/PR AC inlet Connector Power cord Connecting power supplyPutting batteries Remote controlChanging the signal setting for the projectors remote sensor Using the remote controlTurning on the power Power on/offTurning off the power Off. Attach the lens coverSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Searching an input signalSelecting an input signal Selecting an aspect ratioAdjusting the position Using the automatic adjustment feature For a video signal or s-video signal  For a component video signalCorrecting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenOperating the computer screen Available function Remote control operationUSB mouse and keyboard control Move pointerUsing the menu function Multifunctional settingsMenu button Enter button Cursor buttons Reset button Easy MenuEasy Menu Easy Menu Adjust the level using the buttons Picture MenuGamma Color Temp Picture MenuMY Memory Image Menu PhaseOver Scan PositionAuto Adjust For a video signal or s-video signalFor a component video signal Image MenuProgressive Input MenuVideo NR Color SpaceComponent Input MenuVideo Format Frame LockCustom Resolution Setup Menu Using the buttons / switches the mode for mirror status Setup MenuVolume AudioScreen Menu Menu PositionBlank Screen Menu Start UPMyScreen Lock Message Option Menu Auto SearchAuto on Auto OFF Option MenuLamp Time MY ButtonFAN Speed ServiceGhost Filter MessageRemote Freq Factory ResetUse the / button to change the Projectors remote sensor InformationInputting the Password Using Security FeaturesChanging the Password SecurityDescription If you have forgotten your Password Using the MyScreen Password FunctionTurning on the MyScreen Password Function Setting the PasswordUsing the PIN Lock Function Turning the Password offRegistering the PIN Code If you have forgotten your PIN Code Turning Off the PIN Lock FunctionUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off Lamp MaintenanceLamp Case of replacement by yourselfType number = 456-8755E Lamp cover Screw Screws HandleAir filter Type number = NJ22222Handle Filter cover Air filter’s knob Air filterPage There is no input signal TroubleshootingInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Power switch is not set to the on position Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workAudio setting is not correct Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitableEither the focus and/or horizontal phase settings are Not properly adjustedWhisper function is working Lamp is approaching the end of its product LifetimeSpecifications Warranty and after-serviceSpecifications Technical Example of computer signalInitial set signals 75Ω terminated positive Connection to the ports±0.1Vp-p, 75Ω terminator Component Video D Y, E CB/PB, F CR/PR200mVrmsmax kΩ output impedance 200mVrmsmax kΩ terminationCommunications setting Connecting the cableCommand data ProtocolChanging the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandRS-3C Communication CRC Be EF EA F5 Be EF CE D6 CB D6 Pуcckий Be EF 08 D3 RGB1 Page Page Audio Visual Products