Dukane 8110H Press the MY Source / DOC. Camera button on, Computer button, Video button

Operating

Selecting an input signal (continued)

1. Press the COMPUTER button on the remote control. Each time you press the button, the projector switches its input port from the current port as below.

COMPUTER IN 1  COMPUTER IN 2

COMPUTER button

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY FREEZE PAGE VOLUME

UP

ON

● While the ON is selected for the AUTO SEARCH item in

OFF

DOWN

	the OPTION menu, the projector will keep checking every
	port sequentially till an input signal is detected (42). If the
	COMPUTER button is pressed when the VIDEO or S-VIDEO
	port is selected, the projector will check the COMPUTER IN1
	port first.
1.	Press the VIDEO button on the remote control.
	Each time you press the button, the projector switches its
	input port from the current port as below.

S-VIDEO VIDEO

●While ON is selected for AUTO SEARCH item in OPTION menu, the projector will keep checking every port sequentially till an input signal is detected (42). If the VIDEO button is pressed when the COMPUTER IN1 or the COMPUTER IN2 port is selected, the projector will check the S-VIDEOport first.

KEYSTONE	MY BUTTON	MUTE
	1	2
POSITION		MENU

VIDEO button

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY	FREEZE	PAGE		VOLUME
ON		UP
OFF		DOWN
KEYSTONE	MY BUTTON		2	MUTE
	1
POSITION				MENU

Press the MY SOURCE / DOC. CAMERA button on	MY SOURCE /
1. the remote control. The input signal will be changed	DOC. CAMERA button
into the signal you set as the MY SOURCE (44).

●This function also can use for document camera. Select the input port that connected the document camera.

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY	FREEZE	PAGE		VOLUME
ON		UP
OFF		DOWN
KEYSTONE	MY BUTTON		2	MUTE
	1

POSITIONMENU

16