SCREEN menu
Item
Description
MyScreen
This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and the START UP screen. Display the image you want to capture before executing the following procedure.
1.Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start capturing an image from the current screen.
Please wait for the target image to be displayed, and press the ENTER (or the INPUT) button when the image is displayed. The image will freeze and the frame for capturing will appear.
To stop performing, press the RESET (or press the ◄ cursor and the INPUT buttons at the same time) button.
2.Using the ▲/▼/◄/► cursor buttons
adjusts the frame position. Please move the frame to the position of the image which you want to use. The frame may not be able to be moved for
some input signals.
To start registration, press the ENTER (or the INPUT) button on the remote control.
To restore the screen and return to the previous dialog, press the RESET (or press the ◄ cursor and the INPUT buttons at the same time) button.
Registration takes several minutes.
When the registration is completed, the registered screen and the following message is displayed for several seconds:
“MyScreen registration is finished.”
If the registration failed, the following message is displayed:
“A capturing error has occurred. Please try again.”
•This function cannot be selected when the ON is selected to the MyScreen Lock item (39).
•This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in the SECURITY menu (48).
(continued on next page)
38