Dukane 8110H user manual Video Format, Computer, Frame Lock

INPUT menu

Item	Description
	The video format for the S-VIDEOport and the VIDEO port can be set.
	(1) Use the ▲/▼ cursor buttons
	to select the input port.
	S-VIDEO ó VIDEO
	(2) Using the ◄/► cursor
	buttons switches the mode
VIDEO FORMAT	for video format.
	AUTO ó NTSC ó PAL ó SECAM
	N-PAL ó M-PAL ó NTSC4.43
	• This item is performed only for a video signal from the VIDEO port
	or the S-VIDEOport.
	• The AUTO mode automatically selects the optimum mode.
	• The AUTO operation may not work well for some signals. If the
	picture becomes unstable (e.g. an irregular picture, lack of color),
	please select the mode according to the input signal.

The computer input signal type for the COMPUTER IN1 and IN2 ports can be set.

(1)Use the ▲/▼ cursor buttons to select the COMPUTER IN port to be set. COMPUTER IN1 ó COMPUTER IN2

(2)Use the ◄/► cursor buttons to select the computer input signal type.

COMPUTER IN	AUTO ó SYNC ON G OFF
	• Selecting the AUTO mode allows
	you to input a sync on G signal or component video from the port.
	• In the AUTO mode, the picture may be distorted with certain
	input signals. In such a case, remove the signal connector so that
	no signal is received and select the SYNC ON G OFF, and then
	reconnect the signal.
	• The COMPUTER IN1/2 port can support a component signal also
	(&9).
	Set the frame lock function on/off for each port.
	(1) Use the ▲/▼ cursor buttons to select the input ports.
	COMPUTER IN1 ó COMPUTER IN2
	(2) Use the ◄/► cursor buttons to
	turn the frame lock function on/off.
FRAME LOCK	ON ó OFF
	• This item can be performed only on a signal with a vertical
	frequency of 50 to 60 Hz.
	• When the ON is selected, moving pictures are displayed more
	smoothly.
	• This function may cause a certain degradation of the picture. In
	such a case, please select the OFF.

(continued on next page)

32