Dukane 8110H user manual Setup menu, Invalid Scan Freq

SETUP menu

SETUP menu

From the SETUP menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) buttonn to execute the item. Then perform it according to the following table.

Item

Description

	Using the ◄/► cursor buttons adjusts the magnification ratio.
	Small ó Large
D-ZOOM	• The on-screen menu might be displayed outside of the image display
	area depending on the adjustment value of the ASPECT, D-ZOOM
	and KEYSTONE. Changing the values of ASPECT, D-ZOOM and
	KEYSTONE may fix the symptom.
	Using the ◄/► cursor buttons adjusts the vertical picture position.
D-SHIFT V	Down ó Up
	• The D-SHIFT adjustment values are not valid when the D-ZOOM is
	set to 512 (full screen).
	Using the ◄/► cursor buttons adjusts the horizontal picture position.
D-SHIFT H	Left ó Right
	• The D-SHIFT adjustment values are not valid when the D-ZOOM is
	set to 512 (full screen).
	Using the ◄/► cursor buttons adjusts the vertical picture position.
	TOP ó MID ó BOTTOM
	The PICTURE POSITION is not changed if any of the following cases apply.
	• The ASPECT is set to 4:3.
	• The input signal has an aspect ratio of 4:3 or vertically larger than 4:3,
PICTURE POSITION	while the ASPECT is set to NORMAL.
	• Vertical size of the displayed image is full on the effective display area,
	while the ASPECT is set to NATIVE.
	• One of the following messages is displayed on the screen:
	"NO INPUT IS DETECTED"
	"SYNC IS OUT OF RANGE"
	"INVALID SCAN FREQ."
	• The BLANK or TEMPLATE function is selected.

Using the ◄/► cursor buttons corrects the vertical keystone distortion.

	Shrink the bottom of the image ó Shrink the top of the image
	• The adjustable range of this function will vary among inputs. For some
	input, this function may not work well.
KEYSTONE	• This function will be unavailable when the Transition Detector is on (50).

•The on-screen menu might be displayed outside of the image display area depending on the adjustment value of the ASPECT, D-ZOOM and KEYSTONE. Changing the values of ASPECT, D-ZOOM and KEYSTONE may fix the symptom.

	Using the ▲/▼ cursor buttons turns off/on the eco mode.
ECO MODE	NORMAL ó ECO
	• When the ECO is selected, acoustic noise and screen brightness are
	reduced.

(continued on next page) 34