Correcting the keystone distortions, Keystone button

MAGNIFY ON

KEYSTONE MY BUTTON MUTE

1 2

A magnifying glass icon will be displayed on the dialog when the button is pressed while the dialog with the triangles is displayed.

While the triangles are displayed on the dialog, use the ▲/▼/◄/► cursor buttons to shift the magnifying area.

MAGNIFY ON/OFF buttons

Operating

Correcting the keystone distortions

1. Press the KEYSTONE button on the remote control.

A dialog will appear on the screen to aid you in correcting the distortion.

2. Use the ◄/► cursor buttons for adjustment.

To close the dialog and complete this operation, press the KEYSTONE button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds.

KEYSTONE button

ASPECT AUTO SEARCH BLANK

MAGNIFY	FREEZE	PAGE		VOLUME
ON		UP
ON
OFF		DOWN
OFF
KEYSTONE	MY BUTTON		2	MUTE
	1		2

●The adjustable range of this function will vary among inputs. For some input, this function may not work well.

●When the projector is inclined to near ±6 degrees or over, this function may not work well.

●This function will be unavailable when the Transition Detector is on (50).

●The on-screen menu might be displayed outside of the image display area depending on the adjustment value of the ASPECT, D-ZOOM and KEYSTONE. Changing the values of ASPECT, D-ZOOM and KEYSTONE may fix the symptom.

Using the magnify feature

1. Press the MAGNIFY ON button on the remote control. The picture will be magnified, and the MAGNIFY dialog will appear on the screen. When the MAGNIFY ON button is pressed for the first time after the projector is turned on, the picture will be zoomed by

1.5 times. On the dialog, triangle marks to show each direction

will be displayed.

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY FREEZE PAGE VOLUME UP

OFF

DOWN

4. While the magnifying glass icon is displayed on the dialog, use the ▲/▼ cursor buttons to adjust the magnification ratio. The magnification ratio will be adjusted with fine steps. And changes in the ratio in single steps are subtle so they may be hard to recognize.

5. Press the MAGNIFY OFF button on the remote control to exit magnification.

NOTE • The MAGNIFY dialog will automatically disappear in several seconds with no operation. The dialog will appear again if the MAGNIFY ON button is pressed when the dialog has automatically disappeared.

•While the MAGNIFY dialog is displayed, press the MAGNIFY ON button to switch the dialog between magnifying area shifting (with the triangles) and magnification ratio adjustment (with the magnifying glass icon).

•The magnification is automatically disabled when the displaying signal or its display condition is changed.

•While the magnification is active, the keystone distortion condition may vary. It will be restored when the magnification is disabled.

•Some horizontal stripes might be visible on the image while magnification is active.