Operating
Using the menu function (continued)
3. To close the MENU, press the MENU button again or select the EXIT and press the ◄ cursor (or the ENTER) button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds.
●If you want to move the menu position, use the cursor buttons after pressing the
POSITION button.
●Some functions cannot be performed when a certain input port is selected, or when a certain input signal is displayed.
●When you want to reset the operation, press the RESET button on the remote control during the operation. Note that some items (ex. LANGUAGE, VOLUME) cannot be reset.
●In the ADVANCED MENU, when you want to return to the previous display, press the ◄ cursor (or the ESC) button on the remote control.
Indication in OSD (On Screen Display)
The meanings of the general words on the OSD are as follows.
Indication | Meaning | |
|
| |
EXIT | Selecting this word finishes the OSD menu. It's the same as | |
pressing the MENU button on the remote control. | ||
| ||
RETURN | Selecting this word returns the menu to the previous menu. | |
CANCEL or NO | Selecting this word cancels the operation in the present | |
menu and returns to the previous menu. | ||
| ||
OK or YES | Selecting this word executes the prepared function or shifts | |
the menu to the next menu. | ||
|
23