Canon LV-7575 user manual TOP Controls and Indicators

BEFORE OPERATION

TOP CONTROLS AND INDICATORS

This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.

			LAMP MODE INDICATOR	WARNING TEMP. INDICATOR	READY INDICATOR
			Lights when the Lamp	Blinks red when the internal	Lights green when the
			mode is set to “Silent”	temperature of the projector	projector is ready to be
			mode. (p.41)	is too high. (pp.46, 56–57)	turned on. And it blinks
							LAMP INDICATOR
					green in the Power
							Becomes dim when the
					management mode.
					(pp.40, 46, 56–57)		projector is turned on.
							And it becomes bright
LAMP REPLACE INDICATOR
							when the projector is in
Turns to orange when the							stand-by mode.
							(pp.20–21, 56–57)
projection lamp reaches its
end of life.
Blinks orange when the lamp
cannot light up. (pp.48, 56–57)
							POWER BUTTON
						Used to turn the
						projector on or off.
		MENU BUTTON
						(pp.20–21)
		Used to open or
		close the On-Screen					INPUT BUTTON
		Menu. (p.18, 19)
						Used to select an
						input source.
						(pp.24, 31)
						AUTO PC ADJ. BUTTON
	LAMP MODE BUTTON					Used to operate the Auto
	Used to select a Lamp					PC Adjustment function.
	mode. (p.41)					(p.26)

LENS SHIFT BUTTON
Used to select the Lens
				OK BUTTON
Shift function. (p.22)
				Used to execute
				the selected item.
				It is also used to
	ZOOM BUTTON
				expand/compress
	Used to adjust zoom.			the image	in the
			FOCUS BUTTON
	(p.22)			DIGITAL	ZOOM
			Used to adjust focus.
				mode. (p.30)
			(p.22)
		POINT (VOLUME + / – ) BUTTONS
		Used to select an item or adjust a
		value in On-Screen Menu. They are
		also used to pan the image in the
		DIGITAL ZOOM +/– mode. (p.30)
		The POINT LEFT/RIGHT buttons are
		also used as VOLUME +/– buttons.
		(p.23)

17