PREPARATION
ADJUSTABLE FEET
Projection angle can be adjusted up to 10.5 degrees with the
ADJUSTABLE FEET.
1 | Lift the front of the projector and pull the FEET LOCK |
| LATCHES in each side of the projector. |
2 | Release the FEET LOCK LATCHES to lock the ADJUSTABLE |
| FEET and rotate the ADJUSTABLE FEET to a proper height, |
| and tilt. |
3 | To retract the ADJUSTABLE FEET, lift the front of the |
| projector and pull and undo the FEET LOCK LATCHES. |
Keystone distortion of the projected image can be corrected by the Menu Operation. (See pages 22, 38.)
ADJUSTABLE FEET
FEET LOCK
LATCHES
INSTALLING PROJECTOR IN PROPER POSITION
Install the projector properly. Improper installation may reduce the lamp life and cause a fire hazard.
10˚
Do not tilt the projector more than 10 degrees from side to side.
10˚
Do not put the projector on either side to project an image.
NO SIDEWAYS
10˚ |
| 10˚ |
| ||
|
|
|
| 20˚ | |
|
|
| |||
20˚ |
|
|
|
|
| |
10˚ | 10˚ | |||||
| ||||||
When projecting vertically (up or down), keep the projector’s tilt within 10 degrees. Tilting more than 10 degrees in either direction may affect the projector life.
10