PICTURE IMAGE
COLOR SELECTION MODE (continued)
COLOR M.
Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the top control or the remote control unit, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.)
| MENU |
|
| Return to the IMAGE ADJUST Menu. But any settings that | |
| have been changed will not be stored. To store the changed | |
| settings, be sure to select “LIST” and go to the COLOR | |
| MANAGEMENT LIST. | |
4 | In the COLOR MANAGEMENT LIST, the adjusted color | |
| data are check marked. You can decide whether or not | |
to apply the adjusted color data in the list to the projected image (see below).
LIST MODE
Clear the check mark if you do not want to apply the adjusted color data; select the check mark and then press the OK button. The check make disappears.
COLOR PALETTE
Return to the COLOR SELECTION mode so that you can readjust the setting for the color in that line. (This option is not available if the check mark is cleared.)
DEL
Select the DEL box if you want to delete the adjusted data. Press the OK button and a confirmation box appears and then select [Yes]
ALL DEL
Delete all the data in the list. Press the OK button and a confirmation box appears and then select [Yes].
MENU
The same function as stated above.
COLOR M.
The same function as stated above.
Auto picture control
Press the POINT LEFT/RIGHT buttons to select the desired Auto picture control position. The part where the image is dark is emphasized. It is emphasized more strongly in order of Off, L1, L2.
Off . . . . Auto picture control OFF position.
L1 . . . . . Auto picture control LEVEL 1 position.
L2 . . . . . Auto picture control LEVEL 2 position.
Color temp.
Press either the POINT LEFT/RIGHT buttons to select the desired Color temp. level (XLow, Low, Mid, or High).
COLOR SELECTION MODE
Level and phase |
| Gamma |
adjustment palette. |
| adjustment palette. |
|
|
|
LIST |
| COLOR M. |
| MENU |
LIST MODE
COLOR PALETTE
DEL
ALL DEL |
| MENU |
| COLOR M. |
|
|
|
|
|
NOTE:
If you press the COLOR M. button on the remote control unit, the display returns to the normal projection screen, but any settings that have been changed will not be stored. To store the changed settings, be sure to select “MENU” to return to the IMAGE ADJUST Menu and store the settings.
36