BASIC OPERATION
TURNING ON / OFF PROJECTOR
TURNING ON THE PROJECTOR
1 | Complete peripheral connections (with a computer, |
| VCR, etc.) before turning on the projector. |
2 | Connect the projector’s AC power cord into an AC |
| outlet. The LAMP indicator lights RED, and the READY |
| indicator lights GREEN. |
3 | Press the POWER button on the top control or on the |
| remote control unit. The LAMP indicator dims, and the |
| cooling fans start to operate. The preparation display |
| appears on the screen and the countdown starts. |
4 | After the countdown, the input source that was |
| selected the last time and the Lamp mode status icon |
(see page 41) appear on the screen.
If the projector is locked with a PIN code, a PIN code Input Dialog Box appears. Enter the PIN code as instructed below.
To Enter a PIN code
Select a number by pressing the POINT LEFT/RIGHT button and fix the number with the OK button. The number changes to “✳.” If you fixed a wrong number, move the pointer to “Set” or “Clear” once by pressing the POINT DOWN button, then return to “PIN code.” Enter the correct number.
Repeat this step to complete entering a
When the
If you entered a wrong PIN code, “PIN code” and the number (✳✳✳✳) turn red and disappear. Enter a PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector.
A PIN code consists of a
30
The preparation display disappears after 30 seconds.
Selected Input Source and Lamp mode
Lamp mode status
PIN code Input Dialog Box
Pointer
After the OK icon disappears, you can operate the projector.
20