Canon LV-7575 user manual Computer Input, Selecting Input Source, Rgbav Hdcp, Input Menu

COMPUTER INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Select an INPUT source by pressing the INPUT button on the top control or the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control unit.

If the projector cannot reproduce proper image, select a correct input source with the MENU OPERATION (see below).

NOTE:

•Input 1 terminal is switchable and can be used as Computer Input or Monitor Output.

	INPUT button
✽	Input 1
	Input 2

Input 3

✽Input 1 is not displayed when the Input 1 is used as Monitor out.

MENU OPERATION

WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )

1	Press the MENU button to display the On-Screen
	Menu. Press the POINT LEFT/RIGHT buttons to move
	the red frame pointer to the INPUT Menu icon.
2	Press the POINT UP/DOWN buttons to move the red
	arrow pointer to Input 1 and then press the OK button.
	A Source Select Menu appears.
3	Move the pointer to a source that you want to select
	and then press the OK button.

RGB(PC analog)

When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog).

RGB(Scart)

When scart video equipment is connected to the INPUT 1 (ANALOG) terminal, select RGB (Scart).

RGB(PC digital)

When your computer is connected to INPUT 1 (DIGITAL) terminal, select RGB (PC digital).

RGB(AV HDCP)

If a HDCP-compatible signal source is connected to the INPUT 1 (DIGITAL) terminal, select RGB (AV HDCP).

Monitor out

If the INPUT 1 ANALOG terminal is being used as a MONITOR OUT terminal, select Monitor out.

NOTE:

•INPUT SOURCE changes if the INPUT 1 button on the remote control unit is pressed.

•HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content which is delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

INPUT MENU

INPUT Menu icon

Move the pointer (red arrow) to Input 1 and press the OK button.

Input 1

Source Select Menu

Move the pointer (red arrow) to a source and press the OK button.

24