Canon 7365 user manual Introduction Terminal Panel Features 7 8

1. Introduction

Terminal Panel Features 7 8 9 2 3 1

LV-7365/LV-7265

AUDIO IN ANALOG IN-1

	S-VIDEO	L
	IN		DIGITAL IN /
		SERVICE PORT		AUDIO OUT
			ANALOG IN-2
	VIDEO	R
	IN
		AUDIO IN
	6			5	4
LV-7260/LV-X7	7	9
					ANALOG IN
	S-VIDEO	L
	IN
		SERVICE PORT
	VIDEO	R
	IN
		AUDIO IN
	6	8	4		1

1.Computer 1 Input Connector [ANALOG IN-1] (Computer Input Connector [ANALOG IN] on LV-7260/LV-X7) (Mini D-Sub 15 Pin)

Connect your computer or other analog RGB equip- ment such as IBM compatible or Macintosh com- puters. Use the supplied VGA cable to connect to your computer. This also serves as a component input connector that allows you to connect a com- ponent video output of component equipment such as a DVD player. See page 15, 18, 20.

2.Computer 2 Input Connector [DIGITAL IN/ANA- LOG IN-2] (DVI-I 29 Pin) (LV-7365/LV-7265)

5.AUDIO OUT Mini Jack (Stereo Mini) (LV-7365/LV-7265) You can use this jack to output sound from the cur- rently selected source (COMPUTER, VIDEO or S-VIDEO). Output sound level can be adjusted in ac- cordance with the sound level of the internal speaker. Note that this cannot be used as a headphone jack. (When audio equipment is connected, the projector speaker is disabled.)

When a cable mini-plug is inserted into this jack, both the right and left audio signals are not mixed, but separate. For example, when a cable mini-plug is inserted into the left AUDIO IN jack only, only left sound is output.

Connect your computer or other analog RGB equip-	6.	VIDEO IN Connector (RCA)
ment such as IBM compatible or Macintosh comput-		Connect a VCR, DVD player, laser disc player, or
ers.		document camera here to project video. See page 21.
Use the supplied VGA cable to connect to your com-
puter. This also serves as a component input connec-	7.	S-VIDEO IN Connector (Mini DIN 4 Pin)
tor that allows you to connect a component video out-		Here is where you connect the S-Video input from
put of component equipment such as a DVD player.		an external source like a VCR. See page 21.
See page 15, 16.
		NOTE: S-Video provides more vivid color and higher reso-
		lution than the traditional composite video format.

3. AUDIO IN Mini Jack (Stereo Mini) (LV-7365/LV-7265)

This is where you connect the audio output from your computer or DVD player when connected to the COMPUTER input. A commercially available audio cable is required. See page 15, 20.

4.Monitor Output Connector [ ] (Mini D-Sub 15 Pin) You can use this connector to loop your computer im- age to an external monitor from the RGB input source. This connector outputs RGB signal in standby mode. See page 19.

8.AUDIO IN Jacks L/R (RCA)

These are your left and right channel audio inputs for stereo sound from a Video/S-Video source.

These jacks support an analog RGB audio source on LV-7260/LV-X7. See page 18, 21.

9.SERVICE PORT (Mini DIN 8 Pin)

Use this port to connect a PC or control system to control the projector via an optional RS-232C serial cable (LV-CA34). If you are writing your own pro- gram, typical PC control codes are on page 71.