3. Projecting an Image (Basic Operation)
❷Selecting a Source
Selecting the computer or video source
NOTE: Turn on the computer or video source equipment connected to the pro- jector.
Selecting from INPUT List
Press and quickly release the INPUT button on the projector cabinet to display the Source list. Each time the INPUT button is pressed, the input source will change as follows: “Computer 1”, “Computer 2 (Digital/Analog)
WER
POWER INFO.
IMAGE INPUT AUTO PC
INPUT
ASPECT | NO SHOW |
AUTO PC
VOL | MENU |
| |
- |
|
BACK
Detecting the Signal Automatically
Press and hold the INPUT button for a minimum of 2 seconds, the projector will search for the next available input source. Each time you press and hold the INPUT button for a minimum of 2 seconds, the in- put source will change as follows:
Computer 1 → Computer 2 (Digital) → Computer 2 (Analog) → Video
→
Computer → Video →
TIP: If no input signal is present, the input will be skipped.
TIP: The COMPUTER 2 button on the remote control toggles the Computer 2 source between [Computer 2 (Digital)] and [Computer 2 (Analog)].
Selecting Default Source
You can set a source as the default source so that it will be displayed each time the projector is turned on.
1.Select [Setup] → [Options] → [Default source select] from the menu.
The [Default source select] screen will be dis- played.
2.Select a source as the default source, and press the OK button.
3.Press the BACK button a few times to close the menu.
4.Restart the projector.
The source you selected in step 2 will be pro- jected.
(→ page 52)
[Menu example for
26