Canon 7365 Introduction Battery Installation, Operating Range for Wireless Remote Control

Page 19

1. Introduction

Battery Installation

1Press firmly and slide the battery cover off.

2Remove both old batteries and install new ones (AAA). Ensure that you have the batteries' po- larity (+/–) aligned correctly.

3Slip the cover back over the bat- teries until it snaps into place. Do not mix different types of batter- ies or new and old batteries.

Remote Control Precautions

Handle the remote control carefully.

If the remote control gets wet, wipe it dry immediately.

Avoid excessive heat and humidity.

Do not heat, take apart, or throw batteries into fire.

Ensure that you have the batteries' polarity (+/-) aligned correctly.

If you will not be using the remote control for a long time, remove the batteries.

Do not place the batteries upside down.

Do not use new and old batteries together, or use different types of batteries together.

Dispose of used batteries according to your local regulations.

Operating Range for Wireless Remote Control

Horizontal range

Vertical range

Remote sensor on projector cabinet

Remote sensor on projector cabinet

7m/22 feet

 

7m/22 feet

7m/22 feet

 

30°

 

 

30°

30°

30°

30°

30°

 

30°

 

30°

 

 

 

7m/22 feet

Remote control

Remote control

NOTE: The LV-7260 and LV-X7 do not have the remote sensor on the rear panel.

The infrared signal operates by line-of-sight up to a distance of about 7 m (22 feet) and within a 60-degree angle of the remote sensor on the projector cabinet.

The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.

10

Image 19
Contents LV-7365/LV-7265/LV-7260/LV-X7 Machine Noise Information Regulation 3. Gpsgv Safety CautionsPrecautions Important InformationRéglementation canadienne sur les intérferences radio Canadian Radio Interference RegulationsImportant Information Lamp ReplacementDo Not Use in the Following Environments Important SafeguardsInstallation Fire and Shock PrecautionsImportant Information LV-7365 Use Caution When Carrying or Transporting the ProjectorRemote Control Precautions About High altitude modeTable of Contents Viii ❶ Whats in the Box? IntroductionFor LV-7365/LV-7265/LV-7260 Congratulations on Your Purchase of The Projector Features youll enjoy❷ Introduction to the Projector IntroductionIntroduction Front/Top ❸ Part Names of the ProjectorRear Release your hold and turn the logo upside down Introduction BottomTo turn the logo upside down, follow the steps below Push one end of the logo gentlyDetecting the Signal Automatically Introduction Top FeaturesSelecting from Input List Introduction Terminal Panel Features 7 8 ❹ Part Names of the Remote Control Click Button / Button17. D. Zoom + Button Freeze ButtonOperating Range for Wireless Remote Control Introduction Battery InstallationHorizontal range Vertical range Installation and Connections Throw Distance and Screen Size ❶ Setting Up the Screen and the ProjectorInstallation and Connections Selecting a Location LV-7365/LV-7265300 Reflecting the Image Digital Audio Analog IN-2 Analog IN-1 ❷ Making ConnectionsDigital Analog IN-1 Analog IN-2 When Viewing a DVI Digital Signal LV-7365/LV-7265 Audio cable not supplied Audio Installation and Connections Connecting an External MonitorUse audio equipment for stereo sound Video Audio LV-7365 / LV-7265 Audi OIN ❶ Turning on the Projector Projecting an Image Basic OperationTo select a menu language, follow these steps Projecting an Image Basic OperationPress the OK button to execute the selection Selecting Default Source Detecting the Signal Automatically❷ Selecting a Source Lift the front edge of the projector ❸ Adjusting the Picture Size and PositionAdjust the Tilt Foot Rear foot height can be adjusted up to 10 mm/0.4 inchFocus Projecting an Image Basic Operation ZoomCorrecting Keystone Distortion Adjusting with buttons on the cabinetAdjusting with the Remote Control ❹ Correcting Keystone DistortionAuto keystone will be highlighted Adjusting the Image Using Auto PC adjustment ❻ Turning Up or Down Volume❺ Automatically Optimizing on RGB Image To turn off the projector ❼ Turning off the ProjectorPreparation Make sure that the projector is turned off ❽ After Use❸ Enlarging and Moving a Picture Convenient Features❶ Turning off the Image and Sound ❷ Freezing a PictureWhen operating a computer via the remote mouse receiver ❹ Using the Remote Mouse Receiver LV-7365/LV-7265/LV-7260Convenient Features Connecting the remote mouse receiver to your computerAbout Drag Mode ❺ Preventing the Unauthorized Use of the Projector To enable the Password functionTo disable the Password function To turn on the projector when Password is enabledPress the Menu button Type in your password and press the OK button ❶ Using the Menus Using On-Screen MenuFor Selecting items Radio button Using On-Screen MenuFor Adjusting items Slide bar For Selecting items Solid triangleTab ❷ Menu Elements❸ List of Menu Items Image adjustmentReset Selecting Gamma Correction Mode Gamma ❹ Menu Descriptions & Functions Image adjustmentImage mode Detail settings Selecting Reference Setting ReferenceSelecting Aspect Ratio Aspect ❺ Menu Descriptions & Functions Display settingsAdjusting White Balance White balance ResetCopyright Enabling Auto Keystone Auto keystone LV-7365/LV-7265 ❻ Menu Descriptions & Functions SetupSelecting Wall Color Correction Mode Screen color GeneralEnabling Key Sound and Error Sound Beep Selecting Lamp Mode Lamp modeSelecting Menu Language Language Disabling the Cabinet Buttons Key lock Using On-Screen Menu InstallationSelecting Projector Orientation Image flip H/V Selecting Communication Speed Communication speedOptions Selecting Default Source Default source select Enabling Direct Power on Direct power onEnabling Power Management Power management Enabling Fan Speed Mode Fan modeSelecting Signal Format Input signal selectEnabling the deinterlace Deinterlace Usage time Input signalModel Lamp lifeH Replacement lamp Normal Quiet ❼ Menu Descriptions & Functions InformationClearing Lamp Hour Meter Lamp counter ❽ Menu Descriptions & Functions ResetUsing On-Screen Menu Version Resetting settings and adjustments ResetLV-7265/LV-7260/LV-X7 Maintenance❶ Cleaning or Replacing the Filter LV-7365Maintenance ❷ Cleaning the Cabinet and the LensTo replace the lamp ❸ Replacing the LampRemove the lamp Remove the lamp coverInsert a new lamp until the lamp is plugged into the socket Appendix ❶ TroubleshootingIndicator Messages If a temperature error occursAppendix Problem Check These ItemsAppendix LV-X7 1500 lm ❷ SpecificationsOptical ElectricalMechanical LV-7260/LV-X7 ❸ Cabinet DimensionsMini D-Sub 15 Pin Connector ❹ Pin Assignments of D-Sub Analog Input Connector❺ Compatible Input Signal List ❻ Relationship between Screen Size and Projection distance 102 122 78 cm 13 cm 142 107 92 cm 15 cm Cable Connection Service Port Mini DIN-8P❼ PC Control Codes and Cable Connection PC Control CodesOther ❽ Troubleshooting Check ListPower Video and AudioVideo equipment Installation environmentSignal cable ComputerCanon U. S. A., INC