Canon WUX10 manual Screen color correction parametersID, Adjust

Page 81

Projector WUX10 MarkII User Commands

WB

Screen color correction

Format

WB=<Screen color correction parameters:ID>

GET□WB / ?△WB

<Screen color correction parameters:ID>

NORMAL

Standard

GREENBOARD

Blackboard

ADJUST

Adjust

Environment

 

Power

 

 

 

 

Input

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

COMP

VIDEO

HDMI

None

X

O

X

-

 

 

 

Response

"i:OK" is returned if the parameter was set properly.

For 'GET WB' or '?WB', current screen color correction is returned as

'g:WB=<Screen color correction parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1)The screen color correction is set to “Normal”, “Blackboard”, or “Adjust”.

(2)This command functions in the same way as when "Display setting" - "Screen color correction" are selected on the menu.

(3)When "ADJUST" has been selected, adjust the RGB adjustment values using the WBRGB command.

(4)The current screen color correction can be acquired using the applicable GET command. ("GET WB")

Example

Setting

This sets the screen color correction to “Normal”.

> WB=NORMAL

<

i:OK

 

Reference

This retrieves the screen color correction.

>

GET WB or ?WB

<g:WB=GREENBOARD

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 77 -

Page 80 Page 82
Image 81
Page 80 Page 82
Contents Projector WUX10 MarkII User Commands Revision History Table of Contents Error List Error Processing Other Appendix 1. Reset Items Same as or OverviewProjector can be controlled via serial or LAN connection Communication SpecificationsCommunication System Serial Request transmissions sent from PC to the projector ERR response An error message is output Delimiters Delimiters for commands sent from PCExample ExampleCharacter string Or more Ascii characters 20h to 7Fh Or more Ascii characters 20h to 7FhTransmission sent Communication FlowAutopc Command SystemPower Auto SET Autosetexe Aspect Input Auto PC Autopc Command List PMM This indicates the command format Details of CommandThis describes the command response This includes the command function, conditions, and notesFor details on other responses, refer to the Error List 6AXADJControl 6AXR-Y SettingIOK is returned if the parameter was set properly R hue is set to -8, and the color saturation is set toAscombo Auto focusing is executed during auto setup executionAuto set combination parameterID Combine Do not combineAspect Setting This sets the screen size to Wide ASPECT=169GASPECT=TRUE Autopc iOK AutopcAutosetexe Auto focusing is executedThis sets the volume to SettingThis retrieves the volume AvolBlank parameterID BlankBlank is set to on ReferenceSet to Black screen when screen is Blank Screen when Blank setting parameterIDBlankcolor Black screenSetting This sets the brightness to Setting values for Brightness settingNumber are -20 toBRI Reference This retrieves the brightnessBVOL=Beep sound settingNumber Beep sound settingNumber Beep sound mute Beep sound outputBvol This mutes the Beep soundReturns the user command version as GCOMVER=User command versionCharacter stringComver Setting This sets the contrast to +3 Setting values for Contrast settingNumber are -20 toCont Reference This retrieves the contrastThis sets the dynamic gamma function to Weak DgammaDOTS=Number of dotsNumber DotsDOTS=1650 GDOTS=1200This sets direct power-on to OFF Direct power-on is set to onDpon ERR Fcontdrv Freeze parameterID Image now frozen FreezeImage now not frozen Freezes imageFstepdrv Focus lens step control parameterIDFSTEPDRV=Focus lens step control parameterID Ftoneadj GAMMA=Gamma adjustmentNumber Setting values for Gamma adjustment Number are -10 toGamma This sets the gamma correction toGuide Guide setting parameter ID Guide display onGuide display OFF Guide display is set to onHPIX/VPIX HPIX=1024GVPIX= Reference This acquires the vertical position HPOS/VPOSSetting This sets the hue to +8 Setting values for Hue setting valueNumber are -20 toHUE Reference This retrieves the hueImage GIMAGE=CINEMA Imageflip Input selection parametersID InputComponent VideoSetting This locks the remote control keys KeylockReference This retrieves the key lock state Lamp Lamp output setting parametersIDNormal Silent coolingLampcounter For all other responses, refer to Error ListReturns current lamp on time as GLAMPCOUNTER=Lamp on timeCharacter stringLang Setting LED display is set to on LedilluminateThis sets the LED display to OFF Lmpt None Reference This retrieves the lamp timeHours 34 minutes Main Mode reference Mode switchMode GMODE=REMOTE GMODE=LOCALThis mutes the volume This returns the audio/beep sound to its original settingReference GET Mute or ?MUTE This retrieves the volume state MuteThis sets the Blue screen when no signals are input Parameters for setting display screen in no-signal modeIDNosig GNOSIG=BLUEPjon Parameters for setting display screen at startupIDCanon logo No displayExit mode Power management setting parametersIDReference This retrieves the power management mode PMMParameterID Power on PowerPower OFF POWERParameterIDProdcode Product name is returned asGPRODCODE=Product nameCharacter string Progressive conversion setting parametersID This sets the progressive conversion setting to OFFProg POWEROFF, Power button pressed twice Remote control emulation button parametersIDUP+REP, Button press start DOWN+REP, Button press startRC Power iOK Remote control setting parametersID Remote control channel This sets the remote control channel to ch1Rcch Reset parametersID ResetLamp on time reset Current image adjustment resetReset Lamptime Control This resets the lamp on timeSetting R gain is set to 10, G gain to 11 and B gain to Setting values for R/G/B gain settingNumber are -60 toRgbgain RGB gain values are obtainedRgboffset Setting values for R/G/B offset settingNumber are -60 toRGB offset values are obtained Or ?RGBOFFSETRomver ROM version of the firmware is returned asGROMVER=ROM versionCharacter string Reference This retrieves the color saturation SATSAT=-10 GET SAT or ?SATScrnaspect Setting This sets the screen aspect to1610 Display Reference This retrieves the screen aspectSEL=Input signal selection parameterID Input signal selection parameterID AUTOAutoGSEL=Detected input signalID SELReference This retrieves the input signal Setting This sets the input signal selection to AutoGET SEL or ?SEL GSEL=575pSHARP=Sharpness settingNumber Setting values for Sharpness settingNumber are -10 toSharp Reference GET Sharp or ?SHARP This retrieves the sharpnessCurrent image signal input status is returned as SignalstatusSignal statusID GSIGNALSTATUS=Signal statusIDNumber TempTo 127.9 C GTEMP=5,37.1,63.0,38.9,29.7,32.4Setting None Reference TmplGTMPL=5,71.0,90.0,57.0,44.0,53.0 TRACK=Adjustment valueNumber Tracking adjustment value is set toTrack GTRACK=21Setting This sets the vertical keystone to VKSReference This retrieves the vertical keystone Setting This sets the screen color correction to Normal AdjustScreen color correction parametersID Reference This retrieves the screen color correctionSetting This sets R to 10, G to 11, and B to Setting values for R/G/B adjustment valueNumber are -20 toThis retrieves the RGB adjustment values WbrgbZoom lens continuous control parameterID ZcontdrvThis stops the zooming This zooms to the wide-angle endZstepdrv Zoom lens step control parameterIDZSTEPDRV=Zoom lens step control parameterID Badsequence Error ListSystem Unknown Start Error ProcessingYES Other Normal Lamp Appendix 1. Reset ItemsOFF PMM
Related manuals
Manual 2 pages 51.19 Kb

WUX10 specifications

The Canon WUX10 is a highly regarded projector that stands out in the realm of professional display technology. Renowned for its exceptional image quality and advanced features, it is an ideal choice for corporate environments, educational institutions, and event venues.

One of the most notable characteristics of the WUX10 is its WUXGA resolution (1920 x 1200 pixels), which supports 16:10 aspect ratios. This high definition capability ensures that media presentations are sharp, detailed, and vibrant, crucial for capturing the audience's attention and conveying information effectively. The projector utilizes Canon's proprietary AISYS technology, which enhances both brightness and contrast levels, allowing for dynamic visuals even in well-lit rooms.

With a brightness rating of up to 10,000 lumens, the WUX10 delivers clear projections even on large screens or in expansive spaces. This high lumen output is complemented by a contrast ratio of 2000:1, which means deeper blacks and more vivid colors, thereby enriching the viewing experience. The projector's ability to render images accurately makes it suitable for various applications, from corporate presentations to cinema-like experiences.

The Canon WUX10 also supports multiple connectivity options, including HDMI, VGA, and USB ports, as well as wireless capabilities, ensuring compatibility with an array of devices such as laptops, tablets, and smartphones. This versatility allows users to seamlessly stream content without the hassle of tangled cables.

In terms of maintenance and usability, the projector features a long lamp life of approximately 3,000 hours in normal mode and extended to 5,000 hours in eco mode. This longevity reduces the need for frequent replacements and minimizes downtime. Furthermore, a filter-free design simplifies cleaning and upkeep, making the WUX10 a practical solution for users.

With its compact and lightweight design, the Canon WUX10 is easy to transport and install, making it a favorite among professionals who require mobility without compromising on performance. This projector not only meets the demands of high-quality projection but also embodies Canon's commitment to innovation and user-friendliness.

In summary, the Canon WUX10 stands out for its impressive resolution, high brightness, robust connectivity options, and user-centric design. It is a solid investment for anyone looking to elevate their visual presentations.
Top Page Image Contents