Delta Electronics DVPEN01-SL manual Returning to Default Setting

Ethernet Communication Module DVPEN01-SL

1.Modify:

Check the box to modify the password.

2.New Password:

Maximum 4 characters are allowed. Leave the column “blank” to disable the password protection function.

3.Confirm Password:

Enter the new password again.

4.See “Application Examples Section 6.4” for more details. Note:

After the password is locked, all the pages cannot be set up unless you unlock the password. However, if you set up DVPEN01-SL by RS-232, you can return the setting to default setting whether the password is locked or not. For example, if you have locked DVPEN01-SL but forget the password, you have to return DVPEN01-SL to factory default setting by RS-232, and all the settings will return to default ones.

5.9Returning to Default Setting

If you need to clear all the settings after many modifications on the settings and return the settings to default ones, check the “default setting” box.

„Setting up DVPEN01-SL returning to default setting

26 DVP-PLC Application Manual