Delta Electronics DVPEN01-SL manual Installation & Wiring

Ethernet Communication Module DVPEN01-SL

2.3 LED Indicators

Indicator	Color	Indication
POWER	Green	Power indication
RS-232	Red	Communication status of the series port
100M	Orange	Network connection status
LINK	Green	Network communication speed

2.4RJ-45 PIN Definition

RJ-45 sketch	Terminal No.	Definition	Explanation
	1	Tx+	Positive pole for data transmission
	2	Tx-	Negative pole for data transmission
	3	Rx+	Positive pole for data receiving
	6	Rx-	Negative pole for data receiving
	4, 5, 7, 8	-	N/C

3 Installation & Wiring

This section gives instructions on how to connect DVPEN01-SL with PLC MPU and how to connect DVPEN01-SL to the network.

3.1Installation

Connect PLC MPU to DVPEN01-SL

zAdjust the extension clip on the left side of the MPU.

zMeet the extension port of the MPU with DVPEN01-SL as shown in the figure below.

zFasten the extension clip.

DVPEN01	DVP28SV
POWER
RS-232
100M
LINK
	RS-232

LAN

Connect DVPEN01-SL to other extension modules

zTo connect DVPEN01-SL with the other extension module, lift the extension clip of the extension module by a screwdriver and open the side cover.

DVP-PLC Application Manual 5