Ethernet Communication Module DVPEN01-SL
•Use TO instruction to write the network setting parameters D0 ~ D7 into CR#69 ~ #75 in
•After the program is being executed, all the previous network settings in
3.If
4.Execute STOP → RUN in the new
6.4Setting up Password and Clearing Password
Application
Network requirement
Setting up and clearing password by WPLSoft
(1)Set password in
(2)Unlock
(3)Clear the password in
1.See 6.1 for the connection and how to set up the communication.
2.Open the setup page and switch to “Password” page.
3.Check “Modify” box and enter “aabb” in “New Password” and “Confirm Password" columns. Click on “OK” to save the password.
37 |