Delta Electronics manual Ethernet Communication Module DVPEN01-SL

Ethernet Communication Module DVPEN01-SL

CR#		Attribute	Content	Explanation
HW	LW
	#7	R	Status of E-Mail 1, 2	b0 ~ b7: Current status of E-Mail 2
				b8 ~ b15: Current status of E-Mail 1
	#8	R	Status of E-Mail 3, 4	b0 ~ b7: Current status of E-Mail 4
				b8 ~ b15: Current status of E-Mail 3
	#9	R/W	E-Mail 1 additional	Filled in by the user, and it will be send by E-mail.
			message
	#10	R/W	E-Mail 2 additional	Filled in by the user, and it will be send by E-mail.
			message
	#11	R/W	E-Mail 3 additional	Filled in by the user, and it will be send by E-mail.
			message
	#12	R/W	E-Mail 4 additional	Filled in by the user, and it will be send by E-mail.
			message
	#13	R/W	Data exchange trigger	Set up whether to send out data in data exchange mode
	#14	R	Status of data exchange	Displaying current status of data exchange.
#24 ~ #15		-	Reserved
#26	#25	R/W	Destination IP	Destination IP address for data exchange
	#27	-	Reserved
	#28	R/W	Destination Slave ID	Destination Slave ID for data exchange
#48 ~ #29		R/W	Data transmission buffer	Buffer for transmitted data in data exchange
#68 ~ #49		R	Data receiving buffer	Buffer for received data in data exchange
	#69	R/W	DHCP/Static IP	Selecting DHCP or Static IP
#71	#70	R/W	IP address	Setting up IP address
#73	#72	R/W	Subnet mask	Setting up subnet mask of DVPEN01-SL
#75	#74	R/W	Gateway	Setting up default gateway IP address
	#76	R	IP status	Displaying current IP status
#80 ~ #77		-	Reserved
	#81	R/W	Read address for data	Slave transmission buffer address for data exchange
			exchange
	#82	R/W	Read length for data	Number of registers for read data
			exchange
	#83	R/W	Received address for	Buffer address for the receiving Master in data exchange
			data exchange
	#84	R/W	Written-in address for	Buffer address for the receiving Slave in data exchange
			data exchange
	#85	R/W	Written-in length for data	Number of registers for data transmission
			exchange
	#86	R/W	Transmission address	Master transmission buffer address for data exchange
			for data exchange
#110 ~ #87		-	Reserved
	#111	R/W	8-bit processing mode	Setting up Modbus TCP Master control as 8-bit mode
#113 ~ #112		-	Reserved
	#114	R/W	Modbus TCP time-out	Setting up Modbus TCP time-out (in ms)
	#115	R/W	Modbus TCP trigger	Setting up whether to send out data in Modbus TCP mode
	#116	R/W	Modbus TCP status	Displaying current status of Modbus TCP mode
#118	#117	R/W	Modbus TCP	Setting up destination IP address for Modbus TCP transaction
			destination IP

DVP-PLC Application Manual 7