Compaq EK-SMCPO-UG. C01 manual Installing the Upgrade, Saving Existing Configuration

Second Controller Option 5-3

Installing the Upgrade

WARNING: To prevent an electrical discharge from damaging the SIMMs, always wear an ESD wrist or foot strap connected to a suitable ground when handling the memory modules.

NOTE: You can upgrade your firmware using the SCSI or network connection methods. These methods provide the fastest way to upgrade your firmware. To update your controller’s firmware, proceed as follows.

Saving Existing Configuration

NOTE: You must save the subsystem configuration using the StorageWorks Command Console Client (SWCC) before performing the installation procedure. Otherwise, the RAID controller may lose your configuration.

To save your current configuration:

Select the Storage pull-down menu from the Toolbar. Click Controller, select Configuration, and then Save (Figure 5-2).

Figure 5-2. Saving the existing configuration