Compaq SW3323, SW3324, SW3322 manual Front Panel Components, 6Overview

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-6Overview

Table 1-1 defines the front panel components.

	Table 1-1
	Front Panel Components
Name	Function
100Base-FX Fiber Ports (Ports 1	Multi-mode fiber ports used with SC fiber connectors. Indicates Link and
and 2)(SW3323 with fiber card	Activity information.
pre-installed)
Gigabit Ethernet ports 25 and 26	Indicates Link and Activity information
LEDs (SW3324)
1000Base-X Gigabit Ethernet ports	Gigabit Ethernet ports using GBIC modules
SW3324)

Fiber Ports 1 and 2 LEDs (SW3323 with fiber card pre-installed)

Indicates Link and Activity information (see Table 1-2 for details).

Ports 1-24 RJ-45 LEDs (SW3322)	Indicates Link, Activity, Speed and Duplex information (see Table 1-2
	for details).
LED mode button	Button used to switch RJ-45 port LEDs between Link/Activity mode and
	100M/Full Duplex mode. This button has no affect when using Multi-mode
	fiber Ports 1 and 2 (SW3323).
Power LED	Lights steady green to indicate power is supplied to the switch. Off
	indicates no power is supplied to the switch.
Test LED	Lights steady green after a reset and remains on until successful
	completion of power-on self tests. Off indicates a successful completion of
	the power-on self tests.
Console port	DB-9 connector configured as a null modem connection for serial out-of-
	band management using the console menus.