Compaq SW3323, SW3324, SW3322 manual 12Configuring and Monitoring the Switch

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-12Configuring and Monitoring the Switch

To configure the forwarding table, do the following:

1.Select Switch Configuration Menu from the Main Menu.

2.Select Forwarding Table Configuration Menu.

To either make an existing dynamic entry static (Make Entry Static) or delete a static entry (Delete Static Entry), do the following:

1.Select the letter associated with the option.

The following message prompt displays:

Enter MAC Address:

2.Enter the MAC address. Press <Enter>.

To either add a static entry (Add Static Entry) or modify a static entry (Modify Static Entry), do the following:

1.Select the letter associated with the option.

The following message prompt displays:

Enter MAC Address:

2.Enter the MAC address. Press <Enter>.

The following message prompt displays:

Forward to Port (Y/N):

3.Do one of the following:

a.If you select “Y” and Press <Enter>, the system displays:

Enter Port Number (1-26):

Enter the port number and press <Enter>.

b.If you select “N” and press <Enter>, the system displays “discard” in the Disposition field.