Compaq SW3324, SW3323, SW3322 Snmp Configuration Menu, Power Up Diagnostics, Diagnostics enabled

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-7

System Configuration Menu Descriptions continued

Selection	Description
Power Up Diagnostics	Allow you to enable (Yes) or disable (No) Diagnostics at power-up. Default is
	Diagnostics enabled.
Screen Timeout (minutes)	The duration of time before a serial console or Telnet session terminates due to
	user inactivity (0-65535 numeric range). A value of “0” means that the screen will
	not terminate at any time.
Password	Password allowing “read/write” access to the user interface, either via the serial
	console or Telnet (1-10 character range).
Terminal Baud Rate	The baud rate of the serial console interface (2400, 9600 or 19200).
Previous Menu	Returns you to the previous menu.

SNMP Configuration Menu

The SNMP Configuration Menu allows you to modify SNMP-related configuration parameters. Select a from the System Configuration Menu to view the SNMP Configuration Menu. Figure 3-5 shows the SNMP Configuration Menu.

SNMP CONFIGURATION Access Control: READ/WRITE

a.SNMP Private Community Nameprivate

b.SNMP Public Community Namepublic

c. Trap Destination #1 000.000.000.000

d.Community Name #1

e. Trap Destination #2 000.000.000.000

f.Community Name #2

g. Trap Destination #3 000.000.000.000

h.Community Name #3

i. Trap Destination #4 000.000.000.000

j.Community Name #4

x.Previous Menu

Enter Selection:

Figure 3-5SNMP Configuration Menu

Compaq SW3322/SW3323/SW3324 Dual-Speed Switch User Guide