![](/images/new-backgrounds/1143344/14334491x1.webp)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-8 User Interface
Table
| Table |
| SNMP Configuration Menu Descriptions |
|
|
Selection | Description |
|
|
SNMP Private | The community name for read/write SNMP access to the device |
Community Name | range; the default name is: “private”). |
|
|
SNMP Public | The community name for read only SNMP access to the device |
Community Name | range; the default name is: “public”). |
|
|
Trap Destination #1 | The IP address of trap destination #1 where SNMP trap messages are forwarded. |
|
|
Trap Destination #2 | The IP address of trap destination #2 where SNMP trap messages are forwarded. |
|
|
Trap Destination #3 | The IP address of trap destination #3 where SNMP trap messages are forwarded. |
|
|
Trap Destination #4 | The IP address of trap destination #4 where SNMP trap messages are forwarded. |
|
|
Switch Configuration Menu
The Switch Configuration Menu allows you to modify
SWITCH CONFIGURATION Access Control: READ/WRITE
a. Forwarding Table Configuration Menu |
|
b. Spanning Tree Configuration Menu |
|
c. VLAN Configuration Menu |
|
d. Forwarding Table Aging Time(seconds) | 300 |
e. Broadcast Cutoff Rate | 500000 |
f. Port Mirroring Enable | No |
g. Mirrored Port | 2 |
h. Mirroring Port | 1 |
i. Transmit Data Mirroring Enable | Yes |
j. Receive Data Mirror Enable | No |
k. Class of Service Configuration Menu |
|
x. Previous Menu |
|
Enter Selection: |
|