Christie Digital Systems LX66A user manual Move a pointer to Input 2 and press the Select button

Input

Input 2

Move a pointer to Input 2 and press the SELECT button.

RGB	When the input source is analog coming
	from a computer through the Input 2 (5
	BNC-type: Red, Green, Blue, H. Sync., and
	V. Sync.) terminal, select RGB.
Video	When video input signal is connected to the
	Input 2 (VIDEO) terminal , select Video.
Y, Pb/Cb, Pr/Cr	When the input source is component
	coming from video equipment connected to
	the Input 2 (Y, Pb/Cb, Pr/Cr) terminal, select
	Y, Pb/Cb, Pr/Cr.

Source Select Menu

Move the pointer to RGB, Video, or Y, Pb/Cb, Pr/Cr, and press the SELECT button.

Input 3

Move a pointer to Input 3 and press the SELECT button.

Video	When video input signal is connected to the
	Input 3 (VIDEO) terminal, select Video.
Y, Pb/Cb, Pr/Cr	When the input source is component
	coming from video equipment connected to
	the Input 3 (Y, Pb/Cb, Pr/Cr) terminal, select
	Y, Pb/Cb, Pr/Cr.
S-Video	When video input signal is connected to the
	Input 3 (S-VIDEO) terminal, select S-Video.

Source Select Menu

Move the pointer to Video, Y, Pb/Cb, Pr/Cr, or S-Video and press the SELECT button.

Input 4/Input 5

A source menu appears corresponding to the board module inserted into the Input 4 and Input 5 terminals.

✔Note:

•Input 4 and Input 5 can not be selected when no interface board is inserted into the respective slots. (p21)

•Input 5 terminal can only accept digital signals.

•Adjusted values or selected settings in Input 4 and Input 5 return to factory default setting when the connected interface boards are removed from those terminal slots.

Input

37