Christie Digital Systems LX66A user manual Image Adjust

Page 44

Image Adjustment

Image Adjust

adjusts Contrast, Brightness, Color, Tint, Color management, Auto picture control, Color temp., Red, Green, Blue, Sharpness, Gamma, Noise reduction, Progressive, and Film; selects Reset and Store.

1

Press the MENU button to display On-Screen Menu. Spin

Menu icons with the Point buttons (7 and 8) or the Control

 

pad and press the SELECT button when the IMAGE ADJ.

 

icon comes right in front.

2

Move the yellow frame pointer with the Point buttons (e

 

and d) or the Control pad to an item which you want to

 

adjust.

3

Press the SELECT button to display an adjustment dialog

box. Adjust value with the Point buttons (e and d) or the

Control pad.

Contrast

Decrease or increase contrast with the Point buttons (e and d) or the Control pad. (From 0 to 63.)

Brightness

Adjust image darker or brighter with the Point buttons (e and d) or the Control pad. (From 0 to 63.)

Color

Lighten or deeper color with the Point buttons (e and d) or the Control pad. (From 0 to 63.)

Tint

Adjust with the Point buttons (e and d) or the Control pad to obtain proper color. (From 0 to 63.)

Color management

The Color management function enables you to adjust color level, phase and gamma of the selected spot of the projected image and exchange the original color with the adjusted one.

The projector can store up to eight color management data.

Color selection

Press the SELECT button when Color management is highlighted and then Color management pointer will appear. Move the pointer to a spot which you want to adjust the color of with the Point buttons (e, d, 7, and 8) or the Control pad, and press the SELECT button. The image being projected freezes and Color Selection window will appear.

X-axis of COLOR pallet shows Phase and Y-axis, Level.

Select a level and phase which you prefer with the Point buttons (e, d, 7, and 8) or the Control pad and press the SELECT button to move the pointer to GAMMA.

Select a position of GAMMA which you prefer with the Point buttons (e and d) or the Control pad and press the SELECT button.

While adjusting COLOR and GAMMA, the projected image color will change accordingly.

Note:

Color and Tint cannot be displayed when PC input source is selected.

Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M, or PAL-N. (p39)

Image Adjust Menu

IMAGE ADJ. icon

Pointer (yellow frame)

Move the yellow frame pointer with the Point buttons (e and d) or the Control pad to an item which you want to adjust.

Indicates the other items exists below.

Item data

Adjust value with the Point buttons (e and d) or the Control pad.

Color selection

Color management pointer

Move the pointer to a spot which you want to adjust the color of and then press the SELECT button. Color Selection window will appear as shown below.

Pointer

(red frame)

44

Image 44
Contents LX66A Features and Design Compatibility My Menu SelectionTable of Contents To The Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandSetup In Proper Directions Positioning PrecautionsAir Circulation Bottom Front Downward Upward UsualMoving the Projector USE Caution in Carrying or Transporting the ProjectorCompliance Federal Communication Commission NoticePreparation Parts NameFront BackIndicators Top Control Terminals Input 2 terminalsUSB Series B C JackUSB Serial Port OUTRemote Control About Control PadTimer button 4REMOTE RESET/ON/ALL-OFF switchFreeze button CH buttonWired Remote Control Transmitter Remote Control TransmitterRemote Control Channel and ID Setup Remote Control ID Remote Control Battery InstallationRemote Control Channel & Frequency Installation InstallationLens Installation Positioning the ProjectorAdjustable feet Lens Shift AdjustmentLevel Adjustable Feet Connecting AC Power Cord For Continental EuropeFor the U.S.A. and Canada 200 240 V ACOption Control No Connection TerminalsInterface Board Slots Connecting to Computer Digital and Analog RGB Cables used for connectionConnecting to Video Equipment Digital and Video Connecting to Video Equipment Component and RGB Scart Wireless Remote Control Operation Basic OperationOperating the Projector Mouse OperationPad Top Control Remote ControlBasic Operation and Reference Buttons Enter a PJ PIN code What is PIN code?Turning On the Projector Turning Off the Projector Zoom and Focus Adjustment Remote ControlShutter Function Top ControlInformation Auto PC AdjustmentInput Selection Keystone Adjustment Timer FunctionScreen Selection Picture Freeze FunctionZoom Zoom +/- FunctionZoom + How to Operate On-Screen Menu Remote Control OperationTop Control Operation Mouse OperationMenu icon Guide Control bar for Mouse OperationMouse cursor Item dataMenu Icons and Their Features Menu icons What You Can Do with Each MenuRGB Scart InputInput When the input source is analog coming When video input signal is connected toWhen the input source is component Move a pointer to Input 2 and press the Select buttonSystem SystemPC System Selection AutoVideo or S-Video Signal Selection Component Signal SelectionAV System Menu Video or S-Video AV System Menu ComponentComputer Adjustment PC AdjustmentAuto PC Adjust Auto PC adjManual PC Adjust Sync phase ResetPosition ModeImage Adjustment ImageFor PC Input For AV InputImage Adjust Auto picture control Color tempRed GreenGamma Noise reductionProgressive FilmScreen Screen SettingScreen Setting Zoom KeystoneCeiling RearSetting SettingLanguage MenuLogo Enter a Logo PIN codeBackground LampPower management Power managementDisplay Input searchShutter Analog outLens memory Shutter Management SecurityKey lock USB lockTo Change the PJ PIN Code setting To Change PJ PIN CodeFactory default Exits the Setting menuSpecial SpecialFan control FilterUSB memory Test patternRS-232C Exits Warning log menu InformationThen check the matters below Maintenance and CleaningAll indicators except the Lamp indicator are blinking Air Filter Replacement Filter cover Air filterLamp Lamp ReplacementReset the Lamp time Lamp Handling Precautions Attaching the Cord Cover Strap Cleaning the Projection LensCleaning the Projector Cabinet Indicators and Projector Condition Main IndicatorsProjector is OFF. The AC power cord is unplugged May cause electric shock or a fire hazardShutter Indicator Air filter is clogged with dust or has been used overtimeUntil cooling is completed Lamp Replace IndicatorsLamp 1/2 Troubleshooting AppendixWireless Remote Control Lens position moves when InputIs switched Some displays are not seenCompatible Computer Specifications Freq1080i/60 1080i/50Technical Specifications Accessories Optional PartsMenu Tree Screen ScreenImage Image ADJ Special Lamp Dimensions Terminal Configurations USB Connector Series BLogo PIN Code Lock No PIN Code Number MemoPIN Code Lock No Index NumericsAppendix Appendix Appendix Part No -A 610 328 2459 1AA6P1P5105-- KH6K