Christie Digital Systems LX66A Lamp Replace Indicators, Lamp 1/2, Until cooling is completed

Maintenance and Cleaning

Lamp Replace Indicators

Indicators

READY	LAMP	LAMP 1/2		Projector Condition
		REPLACE
Green	Red
			Orange
				The lamp cannot light up. (The projector is preparing for stand-by or the
				projection lamp is being cooled down. The projector cannot be turned on
				until cooling is completed.)
			Slow
				The lamp cannot light up. (The lamp has been cooled down enough and the
				projector is in stand-by mode and ready to be turned on with the POWER
				ON-OFF button.)
			Slow

The lamp is not installed in the projector.

Fast

The lamp of which indicator is lighting has been used overtime. Replace the lamp and then reset the Lamp time. The indicator will turn off.

Both

Either lamp cover is not replaced or fit in.

Both of the indicators keeps blinking three times at regular intervals and the projector cannot be turned on.

Slow

Maintenance & Cleaning

✽When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps with new ones promptly. And then reset the Lamp time after replacement of the lamps. See pages 57, 62, and 63.

67