Maintenance and Cleaning
Indicators and Projector Condition
Main Indicators
Indicators
READY | WARNING | LAMP | Projector Condition |
Green | TEMP | Red |
|
Red |
| ||
|
|
| |
|
|
| The projector is OFF. (The AC power cord is unplugged.) |
The projector is preparing for
The projector is ready to be turned on with the POWER
The projector is operating normally.
The projector is in the Power management mode.
|
|
| The temperature inside the projector is abnormally high. The projector cannot | ||
|
|
| be turned on. When | the projector is cooled down enough and the | |
|
|
| temperature returns to normal, the LAMP indicator lights red and the | ||
|
|
| projector can be turned on. |
| |
|
|
|
| ||
|
|
| The projector has been cooled down enough and the temperature returns to | ||
|
|
| normal. When turning on the projector, the WARNING TEMP indicator stops | ||
|
|
| blinking. Check and clean the air filters. |
| |
|
|
|
| ||
|
|
| The projector detects an abnormal condition and cannot be turned on. Unplug | ||
| READY, WARNING |
| |||
| TEMP, SHUTTER, |
| the AC power cord and plug it again to turn on the projector. If the projector | ||
| WARNING FILTER, LAMP |
| is turned off again, disconnect the AC power cord and contact the dealer or | ||
| 1 REPLACE, AND LAMP 2 |
| the service center for service and checkup. Do not leave the projector on. It | ||
| REPLACE indicators are |
| |||
|
| may cause electric shock or a fire hazard. |
| ||
| blinking all together. |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
LED Conditions: | • • • Off | • • • Lighting | • • • Dim lighting | • • • Blinking | |
Maintenance & Cleaning
65