Christie Digital Systems LX66A user manual Safety Instructions, Voor de klanten in Nederland

Page 5

Safety Instructions

All the safety and operating instructions should be read before the product is operated.

Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

Follow all warnings and instructions marked on the projector.

For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.

Do not expose this unit to rain or use near water... for

example, in a wet basement, near a swimming pool, etc...

Do not use attachments not recommended by the manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating.

The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.

This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of air- conditioning equipment.

This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.

Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.

Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power cord or plug is damaged or frayed.

b.If liquid has been spilled into the projector.

c.If the projector has been exposed to rain or water.

d.If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.

e.If the projector has been dropped or the cabinet has been damaged.

f.When the projector exhibits a distinct change in performance-this indicates a need for service.

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.

Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.

Voor de klanten in Nederland

Bij dit produkt zijn batterijen geleverd.

Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren

NL als KCA.

5

Image 5
Contents LX66A Compatibility My Menu Selection Features and DesignTable of Contents Risk of Electric Shock Do not Open To The OwnerVoor de klanten in Nederland Safety InstructionsPositioning Precautions Setup In Proper DirectionsAir Circulation Bottom Front Downward Upward UsualUSE Caution in Carrying or Transporting the Projector Moving the ProjectorFederal Communication Commission Notice ComplianceParts Name PreparationFront BackIndicators Top Control Input 2 terminals TerminalsC Jack USB Series BUSB Serial Port OUTAbout Control Pad Remote Control4REMOTE RESET/ON/ALL-OFF switch Timer buttonFreeze button CH buttonWired Remote Control Transmitter Remote Control TransmitterRemote Control Channel and ID Setup Remote Control ID Remote Control Battery InstallationRemote Control Channel & Frequency Installation InstallationLens Installation Positioning the ProjectorAdjustable feet Lens Shift AdjustmentLevel Adjustable Feet For Continental Europe Connecting AC Power CordFor the U.S.A. and Canada 200 240 V ACOption Control No Connection TerminalsInterface Board Slots Cables used for connection Connecting to Computer Digital and Analog RGBConnecting to Video Equipment Digital and Video Connecting to Video Equipment Component and RGB Scart Basic Operation Wireless Remote Control OperationOperating the Projector Mouse OperationPad Top Control Remote ControlBasic Operation and Reference Buttons Enter a PJ PIN code What is PIN code?Turning On the Projector Turning Off the Projector Remote Control Zoom and Focus AdjustmentShutter Function Top ControlInformation Auto PC AdjustmentInput Selection Timer Function Keystone AdjustmentScreen Selection Picture Freeze FunctionZoom Zoom +/- FunctionZoom + Remote Control Operation How to Operate On-Screen MenuTop Control Operation Mouse OperationControl bar for Mouse Operation Menu icon GuideMouse cursor Item dataMenu icons What You Can Do with Each Menu Menu Icons and Their FeaturesRGB Scart InputInput When video input signal is connected to When the input source is analog comingWhen the input source is component Move a pointer to Input 2 and press the Select buttonSystem SystemPC System Selection AutoComponent Signal Selection Video or S-Video Signal SelectionAV System Menu Video or S-Video AV System Menu ComponentPC Adjustment Computer AdjustmentAuto PC Adjust Auto PC adjManual PC Adjust Reset Sync phasePosition ModeImage Image AdjustmentFor PC Input For AV InputImage Adjust Color temp Auto picture controlRed GreenNoise reduction GammaProgressive FilmScreen Screen SettingScreen Setting Keystone ZoomCeiling RearSetting SettingLanguage MenuEnter a Logo PIN code LogoLamp BackgroundPower management Power managementDisplay Input searchShutter Analog outLens memory Security Shutter ManagementKey lock USB lockTo Change PJ PIN Code To Change the PJ PIN Code settingExits the Setting menu Factory defaultSpecial SpecialFan control FilterUSB memory Test patternRS-232C Information Exits Warning log menuThen check the matters below Maintenance and CleaningAll indicators except the Lamp indicator are blinking Filter cover Air filter Air Filter ReplacementLamp Lamp ReplacementReset the Lamp time Lamp Handling Precautions Attaching the Cord Cover Strap Cleaning the Projection LensCleaning the Projector Cabinet Main Indicators Indicators and Projector ConditionProjector is OFF. The AC power cord is unplugged May cause electric shock or a fire hazardAir filter is clogged with dust or has been used overtime Shutter IndicatorUntil cooling is completed Lamp Replace IndicatorsLamp 1/2 Appendix TroubleshootingLens position moves when Input Wireless Remote ControlIs switched Some displays are not seenFreq Compatible Computer Specifications1080i/50 1080i/60Technical Specifications Optional Parts AccessoriesScreen Screen Menu TreeImage Image ADJ Special Lamp Dimensions USB Connector Series B Terminal ConfigurationsLogo PIN Code Lock No PIN Code Number MemoPIN Code Lock No Numerics IndexAppendix Appendix Appendix Part No -A 610 328 2459 1AA6P1P5105-- KH6K