Connecting the Projector to Other Video Sources
The optional Compaq Multimedia Adapter must be used to connect the projector to a camcorder, DVD player, or videocassette recorder. This adapter converts signals from the camcorder, DVD player, or videocassette recorder for compatibility with the projector.
Refer to Chapter 3, “Using the Compaq Multimedia Adapter,” for information on attaching and using the Compaq Multimedia Adapter.
Powering On the Projector
Follow these instructions to power on the projector:
1.Make sure the computer and projector power cords and the signal cable are securely connected.
✎Make sure the projector is perpendicular to the projection screen.
2.Remove the lens cap ➊ by pulling it straight out.
3.Turn on the main power switch ➋ on the back of the projector and allow the projector to warm up for one to two minutes.
When the projector has warmed up, the Compaq startup screen displays and the LED on the Standby button ➌ turns green.
Getting Started |