Compaq MP1800 warranty Adjusting the Projected Image, Adjusting the Projector Height

Adjusting the Projected Image

There are three ways to adjust the projected image:

!"

!"

!"

Adjusting the projector height

Adjusting the projector focus

Adjusting the projector zoom

Adjusting the Projector Height

The projector has a built-in elevator foot that can raise the projector approximately 1 inch. To adjust the height:

1.Ensure the foot is turned 90° to balance the projector.

2.Raise the projector to the desired display angle, then press the elevator button ➊ to release the elevator foot ➋.

3.To lower the display angle, press the elevator button again and press down on the projector to lower it.

Getting Started 1-13