Calibrating the Mouse
The mouse ball should be calibrated the first time the remote control is used or when the batteries are changed to adjust or fine- tune the mouse pointing performance.
Perform the following steps to calibrate the remote control:
1.Ensure that the projector, Multimedia Adapter, and remote control are powered on.
2.Press down on the top of the mouse ball and hold it down until it clicks.
3.Move the mouse ball around in as large a circle as possible.
Remote Control Functions
The remote control performs the following functions:
!"
!"
Duplicates the functions of the projector buttons including adjusting the
Controls the computer connected to the projector by navigating through the computer directories and opening and closing files.
Using the Remote Control |