Part Names and Functions
Remote Control Code
The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 51.
1 | Press and hold the MENU and a number button (1–8) |
| for more than five seconds to switch between the |
| codes. |
2 | To initialize the remote control code, slide the RESET/ |
| ON/ALL-OFF switch to “RESET,” and then to “ON.” The |
initial code is set to Code 1.
MENU button
Number buttons
RESET/ON/ALL
OFF Switch
Press and hold the MENU and a number button (1–8) that corresponds to the remote control code for more than five seconds to switch between the codes.