Christie Digital Systems 103-012100-01 user manual Turning Off the Projector

Basic Operation

Turning Off the Projector

1	Press the ON/STAND-BY button on the side control
	or the STAND-BY button on the remote control, and
	“Power off?” appears on the screen.
2	Press the ON/STAND-BY button on the side control or
	the STAND-BY button on the remote control again to
	turn off the projector. The LAMP indicator lights bright
	and the POWER indicator turns off. After the projector
	is turned off, the cooling fans operate for 90 seconds.	“Power off?” disappears after 4 seconds.
	You cannot turn on the projector during this cooling
	down period.
3	When the projector has cooled down enough, the
	POWER indicator lights green and then you can turn on

the projector. To unplug the AC power cord, wait until the projector is completely cooled down.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU

TURN THE PROJECTOR ON, WAIT AT LEAST FIVE

MINUTES BEFORE TURNING IT OFF.

DO NOT UNPLUG THE AC POWER CORD WHILE

COOLING FANS ARE RUNNING OR BEFORE THE

POWER INDICATOR LIGHTS GREEN AGAIN.

OTHERWISE IT WILL RESULT IN SHORTENING OF

THE LAMP LIFE.

DO NOT OPERATE THE PROJECTOR CONTINUOUSLY

WITHOUT REST. CONTINUOUS USE MAY RESULT

IN SHORTENING THE LAMP LIFE. TURN OFF THE

PROJECTOR AND LET STAND FOR ABOUT AN HOUR

IN EVERY 24 HOURS.

✔Note:

•When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.52).

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNINGTEMP. indicator blinks red, see “Warning Indicators” on page 63.

•The projector cannot be turned on during the cooling period with the POWER indicator turned off.You can turn it on again after the POWER indicator becomes green again.

24